Scanner and Accessories

The following is a list of the parts included in the MS7220 kit.

•MS7220 ArgusScan™ Presentation Scanner

•MetroSelect® Programming Guide** [ MLPN 00-02407 or 00-02561 ]

•MS7220 User’s and Installation Guide** [ MLPN 00-02554 ] **Also Available on the Metrologic Website (www.metrologic.com)

•Stand

•Standard Horizontal Stand [ MLPN 46-46406 ]

•Standard Vertical Stand [ MLPN 46-46405 ]

The following items are dependent on the type of MS7220 Kit ordered. Some items may not be included in your kit.

•AC to DC Power Transformer - Regulated 5.2V@ 650 mA output

•One of the following may be included:

•120V United States [ MLPN 45-45593 ]

•220V – 240V Continental European [ MLPN 45-45591 ]

•220V – 240V United Kingdom [ MLPN 45-45592 ]

•Stand

•Optional Flex Stand [ MLPN 46-46404 ]

•PowerLink Cable with built in power jack for use with RS-232, Light Pen, OCIA and 46xx scanners:

•One of the following may be included:

•Standard: 2.1m (7') straight cord, short strain relief [ MLPN 54-54xxx* ]

•Optional: 2.7m (9') coiled cord, long strain relief [ MLPN 53-53xxx* ]

*xxx specifies connection to the host

•Keyboard Wedge PowerLink Cable Kit for use with Keyboard Wedge scanners [ MLPN 54-54002 ]:

•A PowerLink “Y” cable with a 5-pin DIN female connector and a 6-pin mini DIN male connector

•An Adapter Cable with a 5-pin DIN male connector and a 6-pin mini DIN female connector

•Stand Alone Keyboard Wedge Powerlink Cable [ MLPN 54-54020 ]

Other items may be ordered for the specific protocol being used. To order additional items, contact the dealer, distributor or call Metrologic’s Customer Service Department at 1-800-ID-METRO or 1-800-436-3876.