Metrologic Instruments MS7220 manual Getting Started

Page 6

GETTING STARTED

Tools needed:

Phillips head screwdriver

¼”-20 wrench

Drill with a #39 drill bit (drill for hard-mount installation only)

Slide off the cable cover.

Slide off the horizontal stand.

Slide on the cable door and remove the foam insert.

Loosen the lock nut, push back the metal base plate and then slide the cable through the cable opening.

Mounting the MS7220: Peel off the base plate’s tape backing and affix it to the countertop or drill four #39 pilot holes and secure the base plate to the countertop with the four #8 wood screws provided.

Continued on next page.

3

Image 6
Contents Metrologic INSTRUMENTS, INC Locations North AmericaTable of Contents Introduction Scanner and Accessories Stand Alone Keyboard Wedge Powerlink Cable MlpnMetroSelect Programming Guide** Mlpn 00-02407 or Stand Getting Started Getting Started Installation for Ocia Interface To power the unit with an external power supplyTo power the unit from the host device Manufacturers NoteInstallation for Keyboard Wedge Interface Keyboard Wedge InterfacesInstallation for STAND-ALONE Keyboard Interface Stand-Alone Keyboard InterfaceInstallation for RS232 or Light PEN Interfaces Turn on the host systemFor RS232 Communication Installation of AN Auxiliary Scanner Master/Slave Setup Scanner Parts Scanner PartsMULTI-FUNCTION Button Multi-Function ButtonOne Beep Audible IndicatorsThree Beeps on power up Razzberry ToneFlashing Red and Green and Two Razzberry Tones Failure ModesFlashing Green and One Razzberry Tone Continuous Razzberry Tone with both LEDs offVisual Indicators Maintenance LabelsDepth of Field Specifications Top View of Depth of FieldDepth of Field by Minimum BAR Code Element Width MilsSide View of Depth of Field Troubleshooting Guide MS7220 Series Troubleshooting GuideCodes. The scanner Keyboard Wedge Only RS-232 Only Slave operation With any interface RS232 Demonstration Program Applications and Protocols Keyboard TypeKeyboard Country Type Design Specifications EMC Default Settings IBM KBWUPC-E Default Settings XON/XOFF Default Settings Default settings for Aux interface MS7220 Stands Vertical Stand Installation Mlpn Optional Flexible Stand Installation Mlpn MS7220-12 Keyboard Wedge Stand-Keyboard Scanner and Cable TerminationsMS7220-12 MS7220-12 RS-232 or Light PenPin D-type female connector to the PC Pin male mini-DIN connector to the PCMS7220 Auxilary Port RS232 in Only Cable Connector Configuration Limited Warranty Corporate HeadquartersRemarque Patents European StandardIndex LED