North Star M268180M owner manual Step Seven Connect power cords to vehicle battery

Page 11

Assembly (continued)

Step Seven: Connect power cords to vehicle battery

WARNING

Batteries are hazardous because they contain caustic acid, can emit explosive gases, and can cause electric shock.

Caution must be exercised when making connections to a battery to avoid shock and contact with the acid, and to prevent any sparking that could lead to an explosion.

ALWAYS followthe safety instructions and steps listed below in exact sequence when connecting the sprayer’s remote switch to the battery terminals.

1. Preparatory safety

Preparatory safety steps:

 

• ALWAYS use eye protection

 

• NEVER smoke or work near sparks or other sources of ignition.

 

• NEVER touch both battery terminals at the same time or with any non-

 

insulated tools.

 

• If battery acid contacts skin or clothing, flush immediately with water and

 

neutralize with baking soda.

2. Identify sprayer’s

Identify the power cords shipped with the sprayer.

 

power cords

There are three power cords for the sprayer that you will eventually connect end to

 

end to power the sprayer. Locate and identify these three cords:

 

a) The battery power cord and the pump power cord are shipped connected

 

together to the sprayer.

 

 

b) The remote switch power cord is packed separately in the Manual Bag.

 

Battery

 

 

power cord

 

 

Pump power cord

 

 

 

Remote switch

 



power cord

11

Page 10 Page 12
Image 11
Page 10 Page 12
Contents M268180M Hazard Signal Word Definitions Table of Contents Spraying Pesticides Intended UseChemical Application Safety Summary of Important Safety InformationGeneral Chemical Safety ATV Vehicle Handling Safety Chemical Accident Procedures Following items are found in the manual bag Closely inspect all contents in the shipping cartonUnpacking Step Three Attach gun clips to tank AssemblyStep One Attach gauge Step Two Attach gun hose to spray gun and pumpStep Six Attach sprayer to vehicle Step Five Attach hose guide to tankPreparatory safety Preparatory safety steps Step Seven Connect power cords to vehicle batteryTo install battery clamps Separate powerPrepare wire ends Vehicle batteryTogether Attach remote switchWorking condition Step Eight Check and test completed assemblyCheck and test completed assembly Check assemblyMachine Components General Chemical Safety Operation Important Safety InformationAfter Spraying Chemical Application SafetyBefore Spraying During SprayingATV Vehicle Handling Safety To be automatically linked to the nearest certified poison InhalationOperation Preparing the Sprayer for Each Use Important safety rulesSpray because the wind is too strong Operation Using the SprayerStep One Assess wind conditions and clear work area Ensure tank is flushed of all chemicals from prior uses Fill the sprayer using the following stepsStep Two Fill the sprayer Fill tank Check drainEnsure flow Review safetyTurn on power Step Three Operate the sprayerOperate spray gun as needed for application Proper Operation of the Spray GunImmediately Open until desired amount of agitation is achievedLaunder Step Four Clean sprayer and decontaminate after useDrain tank DecontaminateRemoving from storage StoragePreparing for storage Before attempting to service the sprayer TroubleshootingAny Questions, Comments, Problems or Parts Orders SpecificationsPart# Description Exploded View 268180 Rev. M

M268180M specifications

The North Star M268180M is a robust and versatile utility vehicle designed to meet the demands of various industries, including agriculture, construction, and outdoor recreational activities. This model is recognized for its unique blend of power, efficiency, and durability, which make it an ideal option for users seeking a reliable companion for their demanding tasks.

One of the standout features of the M268180M is its powerful engine, which provides robust performance across a range of terrains. The vehicle is equipped with a high-efficiency diesel engine that ensures low fuel consumption while delivering substantial torque. This makes it not only economical to operate but also capable of tackling heavy loads and challenging landscapes with ease.

The M268180M boasts advanced off-road capabilities, thanks to its impressive four-wheel-drive system and superior suspension design. This enables the vehicle to navigate rough and uneven terrain without compromising on comfort or stability. The all-terrain tires provide excellent grip, ensuring that the M268180M can handle mud, sand, and rocky surfaces without difficulty.

In terms of technology, the North Star M268180M is equipped with a user-friendly dashboard that provides essential information at a glance, enhancing the driver's control over the vehicle. Additionally, it features advanced safety systems, including robust braking mechanisms and roll-over protection, ensuring that operators can work safely even in challenging conditions.

Comfort is another key aspect of the M268180M, which is designed with ergonomically crafted seating and ample cabin space. The interior accommodates the driver and passenger comfortably, allowing for long hours of use without fatigue. Furthermore, it offers easy access and excellent visibility, making navigation simple and intuitive.

Durability is paramount in the design of the M268180M, which features a rugged frame and reinforced body to withstand the pressures of heavy-duty use. Its materials are chosen to resist wear and tear, ensuring longevity and reliability in various operating environments.

In summary, the North Star M268180M stands out with its powerful engine, advanced off-road capabilities, user-friendly technology, comfort-focused design, and exceptional durability. This utility vehicle is an excellent choice for those seeking a dependable, high-performance machine to handle their most demanding tasks efficiently.
Top Page Image Contents