North Star M268180M Assembly, Step One Attach gauge, Step Three Attach gun clips to tank

Page 9

Assembly

Step One: Attach gauge

1.Remove and discard the plug in the gauge port.

2.Thread in pressure gauge. Hand tighten, then turn 2 full turns with a wrench.

Step Two: Attach gun hose to spray gun and pump

1.Install hose clamps on hose.

i)Slide hose clamp over the end of the hose.

ii)Push the hose onto the hose barb.

iii)Slide the hose clamp over the hose barb.

iv)Tighten the hose clamp

2.Using 2 hose clamps, attach one end of the gun hose to the pump hose barb.

3.Using 2 hose clamps, attach the other end of the gun hose to the spray gun.

		Hose clamps
	Gun hose	Pressure gauge
	Gun hose	Plug
		Plug

Hose clamps

Spray gun

0 1976

Step Three: Attach gun clips to tank

Fasten one gun clip and one large gun clip to the sprayer tank with #10 x 1/4” screws.

Step Four: Attach drain cap to tank

Press the rubber washer into the drain cap with your finger and thread the drain cap onto the tank.

Gun clip

#10 x ¼” Screws

	Large	Rubber washer
	gun clip	Rubber washer
	gun clip

Drain cap

01978

Image 9

Contents M268180M Hazard Signal Word Definitions Table of Contents Spraying Pesticides Intended UseSummary of Important Safety Information General Chemical SafetyChemical Application Safety ATV Vehicle Handling Safety Chemical Accident Procedures Closely inspect all contents in the shipping carton UnpackingFollowing items are found in the manual bag Step One Attach gauge AssemblyStep Two Attach gun hose to spray gun and pump Step Three Attach gun clips to tankStep Six Attach sprayer to vehicle Step Five Attach hose guide to tankPreparatory safety Preparatory safety steps Step Seven Connect power cords to vehicle batteryPrepare wire ends Separate powerVehicle battery To install battery clampsTogether Attach remote switchCheck and test completed assembly Step Eight Check and test completed assemblyCheck assembly Working conditionMachine Components General Chemical Safety Operation Important Safety InformationBefore Spraying Chemical Application SafetyDuring Spraying After SprayingATV Vehicle Handling Safety To be automatically linked to the nearest certified poison InhalationOperation Preparing the Sprayer for Each Use Important safety rulesOperation Using the Sprayer Step One Assess wind conditions and clear work areaSpray because the wind is too strong Fill the sprayer using the following steps Step Two Fill the sprayerEnsure tank is flushed of all chemicals from prior uses Fill tank Check drainTurn on power Review safetyStep Three Operate the sprayer Ensure flowOperate spray gun as needed for application Proper Operation of the Spray GunImmediately Open until desired amount of agitation is achievedDrain tank Step Four Clean sprayer and decontaminate after useDecontaminate LaunderStorage Preparing for storageRemoving from storage Before attempting to service the sprayer TroubleshootingAny Questions, Comments, Problems or Parts Orders SpecificationsPart# Description Exploded View 268180 Rev. M

M268180M specifications

The North Star M268180M is a robust and versatile utility vehicle designed to meet the demands of various industries, including agriculture, construction, and outdoor recreational activities. This model is recognized for its unique blend of power, efficiency, and durability, which make it an ideal option for users seeking a reliable companion for their demanding tasks.

One of the standout features of the M268180M is its powerful engine, which provides robust performance across a range of terrains. The vehicle is equipped with a high-efficiency diesel engine that ensures low fuel consumption while delivering substantial torque. This makes it not only economical to operate but also capable of tackling heavy loads and challenging landscapes with ease.

The M268180M boasts advanced off-road capabilities, thanks to its impressive four-wheel-drive system and superior suspension design. This enables the vehicle to navigate rough and uneven terrain without compromising on comfort or stability. The all-terrain tires provide excellent grip, ensuring that the M268180M can handle mud, sand, and rocky surfaces without difficulty.

In terms of technology, the North Star M268180M is equipped with a user-friendly dashboard that provides essential information at a glance, enhancing the driver's control over the vehicle. Additionally, it features advanced safety systems, including robust braking mechanisms and roll-over protection, ensuring that operators can work safely even in challenging conditions.

Comfort is another key aspect of the M268180M, which is designed with ergonomically crafted seating and ample cabin space. The interior accommodates the driver and passenger comfortably, allowing for long hours of use without fatigue. Furthermore, it offers easy access and excellent visibility, making navigation simple and intuitive.

Durability is paramount in the design of the M268180M, which features a rugged frame and reinforced body to withstand the pressures of heavy-duty use. Its materials are chosen to resist wear and tear, ensuring longevity and reliability in various operating environments.

In summary, the North Star M268180M stands out with its powerful engine, advanced off-road capabilities, user-friendly technology, comfort-focused design, and exceptional durability. This utility vehicle is an excellent choice for those seeking a dependable, high-performance machine to handle their most demanding tasks efficiently.