North Star M268180M owner manual Machine Components

Page 15

Machine Components



1.) Battery Clamps. Use the battery clamps to connect the battery power cord to the battery.

2.) Battery Power Cord. The battery power cord connects the vehicle battery to the remote switch. This cord remains connected to the battery when the sprayer is not in use.

3.) Remote Switch. The remote switch allows the operator to safely turn ON/OFF the sprayer.

4.) Pump Power Cord. The pump power cord connects the remote switch to the pump.

5.) Gun Hose. The 420” gun hose transfers chemical from the pump to the spray gun.

6.) Sprayer Tank. The sprayer tank holds the chemical.

7.) Fill Cap. The fill cap has a ball check to allow air to enter the tank as the chemical is dispensed, but does not allow chemicalto escape the tank.

8.) Sprayer Pump. The sprayer pump makes the chemical flow to the spray gun and the nozzle.

9.) Pressure Gauge. The pressure gauge is an indicator of the pressure in the system.

10.) Pressure Adjustment Knob. Turn the pressure adjustment knob until the sprayer is running at the desired pressure.

11.) Priming Hose. The priming hose transfers chemicals from the pump back to the tank while priming.

12.) Suction Tube. The suction tube is the inlet line for the pump. The suction tube has a suction strainer to prevent debris from entering the pump.

13.) Priming Valve. The priming valve performs three functions. First, it allows the pump to prime itself when open. Second, it helps keep the chemical well circulated when the valve is left open. Third, it will relieve the system pressure by opening the valve.

14.) Bypass Hose. The bypass hose transfers liquid from the pump to thetank when the system is up to pressure.

15.) Agitation Hose. The agitation hose combines the bypass and priming hose to send the liquid back to the tank to keep the chemical mixed.

16.) Spray Gun. The spray gun has three spraying modes; stream, cone, fog (see operation instructions).

17.) Gun Clips. Use the gun clips to store the spray gun.

18.) Hose Wrap. The hose wrap is built into thetank, and provides a storage location for the gun hose.

15

Page 14 Page 16
Image 15
Page 14 Page 16
Contents M268180M Hazard Signal Word Definitions Table of Contents Spraying Pesticides Intended UseSummary of Important Safety Information General Chemical SafetyChemical Application Safety ATV Vehicle Handling Safety Chemical Accident Procedures Closely inspect all contents in the shipping carton UnpackingFollowing items are found in the manual bag Step Three Attach gun clips to tank AssemblyStep One Attach gauge Step Two Attach gun hose to spray gun and pumpStep Six Attach sprayer to vehicle Step Five Attach hose guide to tankPreparatory safety Preparatory safety steps Step Seven Connect power cords to vehicle batteryTo install battery clamps Separate powerPrepare wire ends Vehicle batteryTogether Attach remote switchWorking condition Step Eight Check and test completed assemblyCheck and test completed assembly Check assemblyMachine Components General Chemical Safety Operation Important Safety InformationAfter Spraying Chemical Application SafetyBefore Spraying During SprayingATV Vehicle Handling Safety To be automatically linked to the nearest certified poison InhalationOperation Preparing the Sprayer for Each Use Important safety rulesOperation Using the Sprayer Step One Assess wind conditions and clear work areaSpray because the wind is too strong Fill the sprayer using the following steps Step Two Fill the sprayerEnsure tank is flushed of all chemicals from prior uses Fill tank Check drainEnsure flow Review safetyTurn on power Step Three Operate the sprayerOperate spray gun as needed for application Proper Operation of the Spray GunImmediately Open until desired amount of agitation is achievedLaunder Step Four Clean sprayer and decontaminate after useDrain tank DecontaminateStorage Preparing for storageRemoving from storage Before attempting to service the sprayer TroubleshootingAny Questions, Comments, Problems or Parts Orders SpecificationsPart# Description Exploded View 268180 Rev. M

M268180M specifications

The North Star M268180M is a robust and versatile utility vehicle designed to meet the demands of various industries, including agriculture, construction, and outdoor recreational activities. This model is recognized for its unique blend of power, efficiency, and durability, which make it an ideal option for users seeking a reliable companion for their demanding tasks.

One of the standout features of the M268180M is its powerful engine, which provides robust performance across a range of terrains. The vehicle is equipped with a high-efficiency diesel engine that ensures low fuel consumption while delivering substantial torque. This makes it not only economical to operate but also capable of tackling heavy loads and challenging landscapes with ease.

The M268180M boasts advanced off-road capabilities, thanks to its impressive four-wheel-drive system and superior suspension design. This enables the vehicle to navigate rough and uneven terrain without compromising on comfort or stability. The all-terrain tires provide excellent grip, ensuring that the M268180M can handle mud, sand, and rocky surfaces without difficulty.

In terms of technology, the North Star M268180M is equipped with a user-friendly dashboard that provides essential information at a glance, enhancing the driver's control over the vehicle. Additionally, it features advanced safety systems, including robust braking mechanisms and roll-over protection, ensuring that operators can work safely even in challenging conditions.

Comfort is another key aspect of the M268180M, which is designed with ergonomically crafted seating and ample cabin space. The interior accommodates the driver and passenger comfortably, allowing for long hours of use without fatigue. Furthermore, it offers easy access and excellent visibility, making navigation simple and intuitive.

Durability is paramount in the design of the M268180M, which features a rugged frame and reinforced body to withstand the pressures of heavy-duty use. Its materials are chosen to resist wear and tear, ensuring longevity and reliability in various operating environments.

In summary, the North Star M268180M stands out with its powerful engine, advanced off-road capabilities, user-friendly technology, comfort-focused design, and exceptional durability. This utility vehicle is an excellent choice for those seeking a dependable, high-performance machine to handle their most demanding tasks efficiently.
Top Page Image Contents