North Star M268180M Step Two Fill the sprayer, Fill the sprayer using the following steps

Page 22

Operation - Using the Sprayer (continued)

Step Two: Fill the sprayer.

WARNING

ALWAYS wear personal protective equipment as directed on the chemical label when handling pesticides.

Long pants and sleeves, chemical resistant gloves, and eye protection are strongly recommended. Additional protective gear may be required depending on the particular pesticide.

Fill the sprayer using the following steps:

1.

Review safety

Review the “Operation – Important Safety Information” related to General

 

information

Chemical Safety and Chemical Accident Procedures provided in this manual.

2.

Choose safe

Choose a safe pesticide mixing and loading area.

 

mixing/

- Choose an outdoor, well-ventilated area away from unprotected people, animals,

 

loading area

food, and other items that might become contaminated.

3. Wear personal

Wear personal protective equipment as directed on the chemical label.

 

protective

- Note that additional equipment may be specified for mixing and loading activities.

 

equipment

 

4. Turn off

Turn OFF power to the sprayer before filling.

 

sprayer and

- The vehicle should also be off, with brake set or wheels blocked to prevent

 

vehicle

unintended movement.

5.

Remove fill

Remove the fill cap located on top of the sprayer.

 

cap

 

 

 

Fill cap

),* 

6.Ensure tank flushed

Ensure tank is flushed of all chemicals from prior uses.

-Chemicals can interact dangerously when mixed, and residue chemicals are also a health hazard.

22

Page 21 Page 23
Image 22
Page 21 Page 23
Contents M268180M Hazard Signal Word Definitions Table of Contents Intended Use Spraying PesticidesGeneral Chemical Safety Summary of Important Safety InformationChemical Application Safety Chemical Accident Procedures ATV Vehicle Handling Safety Unpacking Closely inspect all contents in the shipping cartonFollowing items are found in the manual bag Step Two Attach gun hose to spray gun and pump AssemblyStep One Attach gauge Step Three Attach gun clips to tankStep Five Attach hose guide to tank Step Six Attach sprayer to vehicleStep Seven Connect power cords to vehicle battery Preparatory safety Preparatory safety stepsVehicle battery Separate powerPrepare wire ends To install battery clampsAttach remote switch TogetherCheck assembly Step Eight Check and test completed assemblyCheck and test completed assembly Working conditionMachine Components Operation Important Safety Information General Chemical SafetyDuring Spraying Chemical Application SafetyBefore Spraying After SprayingATV Vehicle Handling Safety Inhalation To be automatically linked to the nearest certified poisonImportant safety rules Operation Preparing the Sprayer for Each UseStep One Assess wind conditions and clear work area Operation Using the SprayerSpray because the wind is too strong Step Two Fill the sprayer Fill the sprayer using the following stepsEnsure tank is flushed of all chemicals from prior uses Check drain Fill tankStep Three Operate the sprayer Review safetyTurn on power Ensure flowProper Operation of the Spray Gun Operate spray gun as needed for applicationOpen until desired amount of agitation is achieved ImmediatelyDecontaminate Step Four Clean sprayer and decontaminate after useDrain tank LaunderPreparing for storage StorageRemoving from storage Troubleshooting Before attempting to service the sprayerSpecifications Any Questions, Comments, Problems or Parts OrdersExploded View 268180 Rev. M Part# Description

M268180M specifications

The North Star M268180M is a robust and versatile utility vehicle designed to meet the demands of various industries, including agriculture, construction, and outdoor recreational activities. This model is recognized for its unique blend of power, efficiency, and durability, which make it an ideal option for users seeking a reliable companion for their demanding tasks.

One of the standout features of the M268180M is its powerful engine, which provides robust performance across a range of terrains. The vehicle is equipped with a high-efficiency diesel engine that ensures low fuel consumption while delivering substantial torque. This makes it not only economical to operate but also capable of tackling heavy loads and challenging landscapes with ease.

The M268180M boasts advanced off-road capabilities, thanks to its impressive four-wheel-drive system and superior suspension design. This enables the vehicle to navigate rough and uneven terrain without compromising on comfort or stability. The all-terrain tires provide excellent grip, ensuring that the M268180M can handle mud, sand, and rocky surfaces without difficulty.

In terms of technology, the North Star M268180M is equipped with a user-friendly dashboard that provides essential information at a glance, enhancing the driver's control over the vehicle. Additionally, it features advanced safety systems, including robust braking mechanisms and roll-over protection, ensuring that operators can work safely even in challenging conditions.

Comfort is another key aspect of the M268180M, which is designed with ergonomically crafted seating and ample cabin space. The interior accommodates the driver and passenger comfortably, allowing for long hours of use without fatigue. Furthermore, it offers easy access and excellent visibility, making navigation simple and intuitive.

Durability is paramount in the design of the M268180M, which features a rugged frame and reinforced body to withstand the pressures of heavy-duty use. Its materials are chosen to resist wear and tear, ensuring longevity and reliability in various operating environments.

In summary, the North Star M268180M stands out with its powerful engine, advanced off-road capabilities, user-friendly technology, comfort-focused design, and exceptional durability. This utility vehicle is an excellent choice for those seeking a dependable, high-performance machine to handle their most demanding tasks efficiently.
Top Page Image Contents