North Star M268180M Chemical Application Safety, Before Spraying, During Spraying, After Spraying

Page 17

Operation – Important Safety Information (continued)

Chemical Application Safety:

WARNING

Caution must be used when spraying chemicals to avoid unsafe exposure to humans and the environment.

Heed the warnings below and follow all instructions carefully.

Before Spraying

•Sprayer prep. ALWAYS inspect and prepare the sprayer before use according to the directions provided in this manual.

•Keep sprayer off. Do not turn on power to the sprayer until ready to spray in order to avoid unintentional spray release.

•Overhead spraying or fogging. Wear additional personal protective equipment if you will be spraying overhead or fogging. You will be exposed to much more pesticide fallout in these applications. Wear chemical resistant head and neck protection, full face mask or half face mask with sealed goggles, and consider using a dust/mist respirator.

•Wind speed. NEVER spray when wind speed exceeds 4 MPH in order to minimize spray drift.

•Clear area/post. ALWAYS keep the work area clear of people and pets. POST warning notices to restrict access by the public for the period recommended on chemical label.

•Operator age. You must be 16 years of age or older to operatethis sprayer. Pesticides are especially toxic to children.

During Spraying

•Overapplication. DO NOT overapply pesticide. Apply at a rate recommended by chemical manufacturer. Excess pesticide can be dangerous to humans, damage desirable plants, and contaminate soil and water sources.

•Never point gun. NEVER point the spray gun at people or animals.

•Use firm grip. ALWAYS hold the spray gun with a firm grip when using it to spray at higher pressures in order to prevent gun from whipping. Keep good footing and balance at all times.

•Children/pets. ALWAYS exercise extra caution when spraying near areas accessible to children and pets.

•Eating/smoking. DO NOT eat, drink, smoke, rub your eyes, or touch any part of your bare skin while handling chemicals and spraying.

•Heat/flames. DO NOT spray near open flames or sources of heat.

•Spills. ALWAYS clean up spills immediately per instructions on the chemical label.

•Unattended. ALWAYS turn off vehicle and set brake or block wheels, turn off power to sprayer, and relieve system pressure before leaving sprayer unattended.

•Troubleshooting. ALWAYS refer to the safety instructions in theTroubleshooting Section before attempting any repairs.

After Spraying

•Clean sprayer. ALWAYS clean the sprayer immediately after use according to the directions provided in this manual.

•Decontaminate. ALWAYS decontaminate yourself immediately after you are finished spraying and handling chemicals. Wash all exposed areas of the body with soap and water and remove and launder clothing.

•Chemical disposal/storage. ALWAYS dispose of or store remaining chemicals properly as recommended on the chemical label.

17

Page 16 Page 18
Image 17
Page 16 Page 18
Contents M268180M Hazard Signal Word Definitions Table of Contents Spraying Pesticides Intended UseChemical Application Safety Summary of Important Safety InformationGeneral Chemical Safety ATV Vehicle Handling Safety Chemical Accident Procedures Following items are found in the manual bag Closely inspect all contents in the shipping cartonUnpacking Step One Attach gauge AssemblyStep Two Attach gun hose to spray gun and pump Step Three Attach gun clips to tankStep Six Attach sprayer to vehicle Step Five Attach hose guide to tankPreparatory safety Preparatory safety steps Step Seven Connect power cords to vehicle batteryPrepare wire ends Separate powerVehicle battery To install battery clampsTogether Attach remote switchCheck and test completed assembly Step Eight Check and test completed assemblyCheck assembly Working conditionMachine Components General Chemical Safety Operation Important Safety InformationBefore Spraying Chemical Application SafetyDuring Spraying After SprayingATV Vehicle Handling Safety To be automatically linked to the nearest certified poison InhalationOperation Preparing the Sprayer for Each Use Important safety rulesSpray because the wind is too strong Operation Using the SprayerStep One Assess wind conditions and clear work area Ensure tank is flushed of all chemicals from prior uses Fill the sprayer using the following stepsStep Two Fill the sprayer Fill tank Check drainTurn on power Review safetyStep Three Operate the sprayer Ensure flowOperate spray gun as needed for application Proper Operation of the Spray GunImmediately Open until desired amount of agitation is achievedDrain tank Step Four Clean sprayer and decontaminate after useDecontaminate LaunderRemoving from storage StoragePreparing for storage Before attempting to service the sprayer TroubleshootingAny Questions, Comments, Problems or Parts Orders SpecificationsPart# Description Exploded View 268180 Rev. M

M268180M specifications

The North Star M268180M is a robust and versatile utility vehicle designed to meet the demands of various industries, including agriculture, construction, and outdoor recreational activities. This model is recognized for its unique blend of power, efficiency, and durability, which make it an ideal option for users seeking a reliable companion for their demanding tasks.

One of the standout features of the M268180M is its powerful engine, which provides robust performance across a range of terrains. The vehicle is equipped with a high-efficiency diesel engine that ensures low fuel consumption while delivering substantial torque. This makes it not only economical to operate but also capable of tackling heavy loads and challenging landscapes with ease.

The M268180M boasts advanced off-road capabilities, thanks to its impressive four-wheel-drive system and superior suspension design. This enables the vehicle to navigate rough and uneven terrain without compromising on comfort or stability. The all-terrain tires provide excellent grip, ensuring that the M268180M can handle mud, sand, and rocky surfaces without difficulty.

In terms of technology, the North Star M268180M is equipped with a user-friendly dashboard that provides essential information at a glance, enhancing the driver's control over the vehicle. Additionally, it features advanced safety systems, including robust braking mechanisms and roll-over protection, ensuring that operators can work safely even in challenging conditions.

Comfort is another key aspect of the M268180M, which is designed with ergonomically crafted seating and ample cabin space. The interior accommodates the driver and passenger comfortably, allowing for long hours of use without fatigue. Furthermore, it offers easy access and excellent visibility, making navigation simple and intuitive.

Durability is paramount in the design of the M268180M, which features a rugged frame and reinforced body to withstand the pressures of heavy-duty use. Its materials are chosen to resist wear and tear, ensuring longevity and reliability in various operating environments.

In summary, the North Star M268180M stands out with its powerful engine, advanced off-road capabilities, user-friendly technology, comfort-focused design, and exceptional durability. This utility vehicle is an excellent choice for those seeking a dependable, high-performance machine to handle their most demanding tasks efficiently.
Top Page Image Contents