North Star M268180M Separate power, Cords, Prepare wire ends, Vehicle battery, Verify connection

Page 12

Assembly (continued)

3. Separate power

Disconnect the battery power cord from the pump power cord.

cords

 

Battery power cord

Pump power cord

 



4. Prepare wire ends

Prepare the wire ends of the sprayer’s battery power cord for connection to

 

the vehicle battery:

a)Determine thetype of end connectors you need to connect to your vehicle’s battery terminals.

b)Install battery clamps (supplied) or end connectors of your choosing on the bare ends of the sprayer’s battery power cord wires.

 

To install battery clamps:

Hoop

 

1.

Remove red plastic handle

Prongs

 

 

shield from red battery

Strip ½”

 

 

clamp and slide onto red wire

 

 

Red wire

 

2.

Strip red battery cord wire ½”

 

 

 

3.

Insert bare wire under raised hoop

Handle

 

 

on red battery clamp handle

shield

 

4.

Use a pliers to press hoop down and crimp wire

 

 

5.

Fold prongs over wire insulation to hold wire in place

 

6.

Push plastic handle shield back over battery clamp handle

 

7.

Repeat for black wire and black battery clamp.



5. Connect power cord

Connect the sprayer’s battery power cord to the vehicle battery using the

to battery

 

following procedure:

 

a)Disconnect the vehicle battery ground wire.

b)Connect the remote switch’s red battery clamp or red wire connector to the positive(+) terminal of the battery.

c)Connect the remote switch’s black battery clamp or black wire connector to the negative(-)terminal of the battery.

d)Reconnect the vehicle battery ground wire.

WARNING: Always connect in this sequence to avoid possible shock.

6. Verify connection

Verify a complete connection has been made by checking with a DC voltmeter,

 

or by briefly connecting to the pump power cord and listening for pump

 

activation.

7.Attach sprayer to vehicle if haven’t yet

If you have not yet mounted the sprayer to your vehicle, do so at this time following the instructions in “Step Six: Attach Sprayer to Vehicle”.

12

Page 11 Page 13
Image 12
Page 11 Page 13
Contents M268180M Hazard Signal Word Definitions Table of Contents Intended Use Spraying PesticidesSummary of Important Safety Information General Chemical SafetyChemical Application Safety Chemical Accident Procedures ATV Vehicle Handling Safety Closely inspect all contents in the shipping carton UnpackingFollowing items are found in the manual bag Assembly Step One Attach gaugeStep Two Attach gun hose to spray gun and pump Step Three Attach gun clips to tankStep Five Attach hose guide to tank Step Six Attach sprayer to vehicleStep Seven Connect power cords to vehicle battery Preparatory safety Preparatory safety stepsSeparate power Prepare wire endsVehicle battery To install battery clampsAttach remote switch TogetherStep Eight Check and test completed assembly Check and test completed assemblyCheck assembly Working conditionMachine Components Operation Important Safety Information General Chemical SafetyChemical Application Safety Before SprayingDuring Spraying After SprayingATV Vehicle Handling Safety Inhalation To be automatically linked to the nearest certified poisonImportant safety rules Operation Preparing the Sprayer for Each UseOperation Using the Sprayer Step One Assess wind conditions and clear work areaSpray because the wind is too strong Fill the sprayer using the following steps Step Two Fill the sprayerEnsure tank is flushed of all chemicals from prior uses Check drain Fill tankReview safety Turn on powerStep Three Operate the sprayer Ensure flowProper Operation of the Spray Gun Operate spray gun as needed for applicationOpen until desired amount of agitation is achieved ImmediatelyStep Four Clean sprayer and decontaminate after use Drain tankDecontaminate LaunderStorage Preparing for storageRemoving from storage Troubleshooting Before attempting to service the sprayerSpecifications Any Questions, Comments, Problems or Parts OrdersExploded View 268180 Rev. M Part# Description

M268180M specifications

The North Star M268180M is a robust and versatile utility vehicle designed to meet the demands of various industries, including agriculture, construction, and outdoor recreational activities. This model is recognized for its unique blend of power, efficiency, and durability, which make it an ideal option for users seeking a reliable companion for their demanding tasks.

One of the standout features of the M268180M is its powerful engine, which provides robust performance across a range of terrains. The vehicle is equipped with a high-efficiency diesel engine that ensures low fuel consumption while delivering substantial torque. This makes it not only economical to operate but also capable of tackling heavy loads and challenging landscapes with ease.

The M268180M boasts advanced off-road capabilities, thanks to its impressive four-wheel-drive system and superior suspension design. This enables the vehicle to navigate rough and uneven terrain without compromising on comfort or stability. The all-terrain tires provide excellent grip, ensuring that the M268180M can handle mud, sand, and rocky surfaces without difficulty.

In terms of technology, the North Star M268180M is equipped with a user-friendly dashboard that provides essential information at a glance, enhancing the driver's control over the vehicle. Additionally, it features advanced safety systems, including robust braking mechanisms and roll-over protection, ensuring that operators can work safely even in challenging conditions.

Comfort is another key aspect of the M268180M, which is designed with ergonomically crafted seating and ample cabin space. The interior accommodates the driver and passenger comfortably, allowing for long hours of use without fatigue. Furthermore, it offers easy access and excellent visibility, making navigation simple and intuitive.

Durability is paramount in the design of the M268180M, which features a rugged frame and reinforced body to withstand the pressures of heavy-duty use. Its materials are chosen to resist wear and tear, ensuring longevity and reliability in various operating environments.

In summary, the North Star M268180M stands out with its powerful engine, advanced off-road capabilities, user-friendly technology, comfort-focused design, and exceptional durability. This utility vehicle is an excellent choice for those seeking a dependable, high-performance machine to handle their most demanding tasks efficiently.
Top Page Image Contents