North Star M268180M owner manual Step Eight Check and test completed assembly, Check assembly

Page 14

Assembly (continued)

Step Eight: Check and test completed assembly.

WARNING

Check and test completed assembly

Serious injury could result from chemical leaks if sprayer is improperly assembled or the design of the sprayer is modified.

Follow the steps below to ensure the sprayer is properly assembled. Never modify the sprayer design.

1. Check assembly

Check assembly to assure the sprayer is properly assembled and in safe

 

working condition:

a)Check that the gun clip screws are tight, hose clamps are secure, and tank straps are properly fastened.

b)While it is unlikely that factory assembled components become loose, they should also be checked to make sure they aretight.

2.Test with water Test the system for leaks with water:

a)First read the instructions in this Owner’s Manual for Operation of the sprayer

b)Fill the tank with water per the instructions in this manual. Important: The sprayer should be OFF when you fill the tank.

c)Check for leaks throughout the system by operating the sprayer per the instructions in this manual:

i)Turn the sprayer ON. (See Operation Instructions)

ii)Operate the spray gun. (See Operation Instructions)

iii)Adjust the pressure through its full range – to maximum and back. (See Operation Instructions)

d)If a leak is detected, fix the leak and re-test the system with water.

14

Page 13 Page 15
Image 14
Page 13 Page 15
Contents M268180M Hazard Signal Word Definitions Table of Contents Intended Use Spraying PesticidesChemical Application Safety Summary of Important Safety InformationGeneral Chemical Safety Chemical Accident Procedures ATV Vehicle Handling Safety Following items are found in the manual bag Closely inspect all contents in the shipping cartonUnpacking Step Two Attach gun hose to spray gun and pump AssemblyStep One Attach gauge Step Three Attach gun clips to tankStep Five Attach hose guide to tank Step Six Attach sprayer to vehicleStep Seven Connect power cords to vehicle battery Preparatory safety Preparatory safety stepsVehicle battery Separate powerPrepare wire ends To install battery clampsAttach remote switch TogetherCheck assembly Step Eight Check and test completed assemblyCheck and test completed assembly Working conditionMachine Components Operation Important Safety Information General Chemical SafetyDuring Spraying Chemical Application SafetyBefore Spraying After SprayingATV Vehicle Handling Safety Inhalation To be automatically linked to the nearest certified poisonImportant safety rules Operation Preparing the Sprayer for Each UseSpray because the wind is too strong Operation Using the SprayerStep One Assess wind conditions and clear work area Ensure tank is flushed of all chemicals from prior uses Fill the sprayer using the following stepsStep Two Fill the sprayer Check drain Fill tankStep Three Operate the sprayer Review safetyTurn on power Ensure flowProper Operation of the Spray Gun Operate spray gun as needed for applicationOpen until desired amount of agitation is achieved ImmediatelyDecontaminate Step Four Clean sprayer and decontaminate after useDrain tank LaunderRemoving from storage StoragePreparing for storage Troubleshooting Before attempting to service the sprayerSpecifications Any Questions, Comments, Problems or Parts OrdersExploded View 268180 Rev. M Part# Description

M268180M specifications

The North Star M268180M is a robust and versatile utility vehicle designed to meet the demands of various industries, including agriculture, construction, and outdoor recreational activities. This model is recognized for its unique blend of power, efficiency, and durability, which make it an ideal option for users seeking a reliable companion for their demanding tasks.

One of the standout features of the M268180M is its powerful engine, which provides robust performance across a range of terrains. The vehicle is equipped with a high-efficiency diesel engine that ensures low fuel consumption while delivering substantial torque. This makes it not only economical to operate but also capable of tackling heavy loads and challenging landscapes with ease.

The M268180M boasts advanced off-road capabilities, thanks to its impressive four-wheel-drive system and superior suspension design. This enables the vehicle to navigate rough and uneven terrain without compromising on comfort or stability. The all-terrain tires provide excellent grip, ensuring that the M268180M can handle mud, sand, and rocky surfaces without difficulty.

In terms of technology, the North Star M268180M is equipped with a user-friendly dashboard that provides essential information at a glance, enhancing the driver's control over the vehicle. Additionally, it features advanced safety systems, including robust braking mechanisms and roll-over protection, ensuring that operators can work safely even in challenging conditions.

Comfort is another key aspect of the M268180M, which is designed with ergonomically crafted seating and ample cabin space. The interior accommodates the driver and passenger comfortably, allowing for long hours of use without fatigue. Furthermore, it offers easy access and excellent visibility, making navigation simple and intuitive.

Durability is paramount in the design of the M268180M, which features a rugged frame and reinforced body to withstand the pressures of heavy-duty use. Its materials are chosen to resist wear and tear, ensuring longevity and reliability in various operating environments.

In summary, the North Star M268180M stands out with its powerful engine, advanced off-road capabilities, user-friendly technology, comfort-focused design, and exceptional durability. This utility vehicle is an excellent choice for those seeking a dependable, high-performance machine to handle their most demanding tasks efficiently.
Top Page Image Contents