Multiquip LT12DAB General information, Metal Halide Lamps, Convenience Receptacle plates

Page 15

general information

The Multiquip LT12DAB Light Tower is a dedicated general purpose light tower engineered to provide dependable lighting for a wide range of applications. This includes lighting for construction sites, industrial locations, special events, and emergency conditions.

Metal Halide Lamps

The lighting system of the LT12DAB Light Tower is comprised of 4 metal halide, 1000-watt lamps.These lamps provide maximum illumination with typical lighting coverage of 5 to 7 acres.The lamps are controlled by individual circuit breakers for versatility.

ENGINE

The LT12 Light Tower is powered by a diesel engine that is equipped with automatic shutdowns for low oil pressure, high coolant temperature, and alternator charge failure.

STABILITY

The light tower can be raised vertically in excess of 31.5 feet (9.6 meters) by means of a manual winch. The tower tensioning system is designed to provide the necessary tension to safely control the pivot of the tower. The light tower has a wind stability of up to 65 mph with outriggers and jackstands fully deployed.

PANEL LIGHT

A panel light automatically illuminates the control panel and all functions when the engine access door is opened. This feature is convenient for night deployment.

CONVENIENCE RECEPTACLE plates

As an added feature, the LT12DAB is equipped with two external plates with wiring ready to install auxiliary output receptacles. Receptacles can be installed for use with light power tools or other similar applications.

FUEL TANK

The 30-gallon fuel tank provides up to 64 hours of run time while running at 3/4 load.

TRAILER DESIGN

The trailer design of the LT12DAB light tower withstands the rigors of the jobsite in addition to providing smooth highway towing.

LT12Dab LIGHT TOWER • operation manual — rev. #0 (06/03/11) — page 15

Image 15
Contents Model LT12DAB Specifications are subject to change without notice Table of ContentsAddresses practices not related to personal injury Safety InformationSaFeTY meSSageS SaFeTY SYmbOLSGeneRaL SaFeTY Lamp SaFeTY LIgHT TOWeR SaFeTY„ The engine of this equipment Requires an adequate free EngIne SaFeTYFrom fuel vapors or if fuel is spilled on a hot engine FueL SaFeTYTOWIng SaFeTY „ neveR use fuel as a cleaning agentLoading and Tie-Down on Flatbed Truck TRanSpORTIng SaFeTY„ aLWaYS make sure the area ELeCTRICaL SaFeTYPower Cord/Cable Safety Grounding SafetyEnvIROnmenTaL SaFeTY BaTTeRY SaFeTYLamp Footcandle Plot Lamp footcandle plotLT12DAB Specifications Generator SpecificationsTrailer Specifications Engine Specifications Length Mast Stowed Position Length Mast Deployed Position DimensionsDimensions Reference Letter Description DimensionGeneral information Metal Halide LampsConvenience Receptacle plates Major Components Control Panel Side ComponentsView Control panel Controls and IndicatorsControl panel Engine Oil Check Indoor InstallationInspection Before startingWipe up any spilled fuel immediately Battery CheckOperation in Freezing Weather Cleaning the RadiatorAir Cleaner Fan Belt Tension CoolantLocation of Female Connectors Outriggers and Support Stands OperationStarting the Engine Mast operationStowing the Mast to Horizontal Position Deploying the Mast to Vertical PositionRaising the Mast Lowering the MastMast Operation AUXILIARY Output Receptacles Turning On the LampsEmergency Shutdown Normal ShutdownFrequency MaintenanceBasic Inspection and Maintenance Inspection/MaintenanceGeneral Inspection Service DailyAir Cleaner Cleaning the Fuel StrainerReplacing Fuel Filter Changing OilLower the mast to the horizontal resting position Check Cable WearServicingthe Mast Raise/Lower Cable System Servicingthe Mast Extension Cable SystemRemoval From Long Term Storage StorageMaintenance Trailers Adjustable ChannelWheel Hub Adjustment Leaf Suspension Components Leaf SuspensionSymptom Possible Problem Solution Generator TroubleshootingSymptom Possible Cause Solution Engine TroubleshootingEngine revolution is not Lamp Troubleshooting Lamp starts slowly ARC does not strike Defective Lamp? When switch is first Checking voltage and ballast Turned onReplacement minimizes color differences Clean fixtureBallast Removal Lamp Troubleshooting GuideConnections StartingStator Light tower wiring diagramWHT GRN BLK Lombardini engine wiring diagram „ Driving too fast for the conditions obey local speed laws Trailer guidelinesCOmmOn CauSeS for Loss of TRaILeR TRaILeR TOWIng guIDeLIneSCOupLIng to THe TOW veHICLe DRIvIng COnDITIOnSInOpeRabLe bRaKeS, LIgHTS or mIRRORS TRaILeR TOWIng TIpSTRaILeR vIn Tag SIDe vIeW mIRRORS ELeCTRICaL COnneCTORTOW veHICLe SuSpenSIOn SYSTemSaFeTY CHaInS JaCKSTanDCOupLeR TYpeS Coupling the Trailer to the Tow vehicle ball Coupler Lock washer and hitch frameAttaching Safety Chain Connecting Trailer LightsUncoupling the ball Hitch Pintle Coupler and pintle Hook PInTLe Hitch COupLeRCoupling Trailer to Tow vehicle pintle Coupler TIRe SaFeTY Unsafe Tires, Lug nuts or WheelsBe sure lug nuts are tight before each tow Determining Load Limit of TrailerStep Tighten lug nuts before each towDetermining Load Limit of Tow vehicle Step TIRe FunDamenTaLSP indicates the tire is for passenger vehicles Uniform Tire Quality grading Standards uTQgS Table a. Speed RatingLetter Rating Speed Rating Replacing Worn or Damaged Tires Tire Safety TipsTable b. Tire Wear Troubleshooting Tire RepairLug nut Torque Requirements Lights and SignalsWheel Rims Wheels, bearings and Lug nutsFigure L. Trailer to Tow Vehicle Wiring Diagram HERE’S HOW to GET Help

LT12DAB specifications

The Multiquip LT12DAB is an innovative and reliable light tower designed to deliver efficient lighting solutions for various outdoor applications. Known for its robust construction and user-friendly features, the LT12DAB is ideal for construction sites, events, and emergency situations, providing flexibility and performance in a compact package.

One of the standout features of the LT12DAB is its powerful lighting system. It is equipped with four high-intensity LED lights, each delivering up to 12,000 lumens, ensuring ample illumination for expansive areas. The LED technology not only enhances visibility but also offers advantages in power consumption, resulting in reduced energy costs and longer operational life. The tower can be raised up to 30 feet, enabling it to cast a broad beam of light across large outdoor spaces.

The LT12DAB is built with advanced mobility in mind. It features a durable, weather-resistant frame that can withstand various environmental conditions, making it suitable for use in diverse locations. The all-terrain wheels provide enhanced maneuverability, allowing operators to transport the unit easily across job sites or uneven terrains. Additionally, the lightweight design ensures that it can be easily handled by a small crew.

Powering the LT12DAB is a reliable and fuel-efficient diesel generator that provides extended run times without frequent refueling. This generator not only supports the lighting system but can also power additional tools and equipment, adding versatility to its functionality. The unit is designed with low noise emissions, making it ideal for operation in noise-sensitive areas.

Ease of use is paramount in the design of the LT12DAB. The intuitive control panel allows users to operate the lights and generator effortlessly. The telescopic mast can be raised or lowered quickly, with safety features in place to prevent accidental collapse. Moreover, the integrated sensors monitor the oil levels and engine temperature, providing alerts for maintenance needs.

In summary, the Multiquip LT12DAB combines powerful lighting capabilities with robust construction and user-friendly features. Its mobility, energy efficiency, and reliability make it a valuable tool for any outdoor project, ensuring that worksites remain well-lit and safe, regardless of the conditions. Whether for construction, events, or emergencies, the LT12DAB stands out for its performance and adaptability, meeting the demands of today’s professional environments.