Multiquip LT12DAB FueL SaFeTY, TOWIng SaFeTY, „ neveR use fuel as a cleaning agent

Page 7

Safety Information

FueL SaFeTY

DangeR

„DO nOT start the engine near spilled fuel or combustible fl uids. Diesel fuel is extremely fl ammable and its vapors can cause an explosion if ignited.

„aLWaYS refuel in a well-ventilated area, away from sparks and open fl ames.

„aLWaYS use extreme caution when working with flammable liquids.

„DO nOT fi ll the fuel tank while the engine is running or hot.

„DO nOT overfi ll tank, since spilled fuel could ignite if it comes into contact with hot engine parts or sparks from the ignition system.

„Store fuel in appropriate containers, in well-ventilated areas and away from sparks and fl ames.

„neveR use fuel as a cleaning agent.

„DO nOT smoke around or near the equipment. Fire or explosion could result

from fuel vapors or if fuel is spilled on a hot engine.

TOWIng SaFeTY

CauTIOn

„Check with your local county or state safety towing regulations, in addition to meeting

Department of Transportation (DOT) SafetyTowing Regulations, before towing your light tower.

„In order to reduce the possibility of an accident while transporting the light tower on public roads, aLWaYS make sure the trailer that supports the light tower and the towing vehicle are mechanically sound and in good operating condition.

„aLWaYS shutdown engine before transporting.

„Make sure the hitch and coupling of the towing vehicle are rated equal to, or greater than the trailer “gross vehicle weight rating.”

„aLWaYS inspect the hitch and coupling for wear. neveR tow a trailer with defective hitches, couplings, chains, etc.

„Check the tire air pressure on both towing vehicle and trailer. Trailer tires should be inflated to 50 psi cold. Also check the tire tread wear on both vehicles.

„aLWaYS make sure the trailer is equipped with a safety chain.

„aLWaYS properly attach trailer’s safety chains to towing vehicle.

„aLWaYS make sure the vehicle and trailer directional, backup, brake and trailer lights are connected and working properly.

„DOT Requirements include the following:

•Connect and test electric brake operation.

•Secure portable power cables in cable tray with tie wraps.

„The maximum speed for highway towing is 55 mpH unless posted otherwise. Recommended off-road towing is not to exceed 15 mpH or less depending on type of terrain.

„Avoid sudden stops and starts.This can cause skidding, or jack-knifi ng. Smooth, gradual starts and stops will improve towing.

„Avoid sharp turns to prevent rolling.

„Trailer should be adjusted to a level position at all times when towing.

„Raise and lock trailer wheel stand in up position when towing.

„Place chock blocks underneath wheel to prevent rolling while parked.

„Place support blocks underneath the trailer’s bumper to prevent tipping while parked.

„Use the trailer’s swivel jack to adjust the trailer height to a level position while parked.

LT12Dab LIGHT TOWER • operation manual — rev. #0 (06/03/11) — page 7

Page 6 Page 8
Image 7
Page 6 Page 8
Contents Model LT12DAB Specifications are subject to change without notice Table of ContentsAddresses practices not related to personal injury Safety InformationSaFeTY meSSageS SaFeTY SYmbOLSGeneRaL SaFeTY Lamp SaFeTY LIgHT TOWeR SaFeTY„ The engine of this equipment Requires an adequate free EngIne SaFeTYFrom fuel vapors or if fuel is spilled on a hot engine FueL SaFeTYTOWIng SaFeTY „ neveR use fuel as a cleaning agentLoading and Tie-Down on Flatbed Truck TRanSpORTIng SaFeTY„ aLWaYS make sure the area ELeCTRICaL SaFeTYPower Cord/Cable Safety Grounding SafetyEnvIROnmenTaL SaFeTY BaTTeRY SaFeTYLamp Footcandle Plot Lamp footcandle plotGenerator Specifications LT12DAB SpecificationsTrailer Specifications Engine Specifications Length Mast Stowed Position Length Mast Deployed Position DimensionsDimensions Reference Letter Description DimensionMetal Halide Lamps General informationConvenience Receptacle plates Major Components Control Panel Side ComponentsView Control panel Controls and IndicatorsControl panel Engine Oil Check Indoor InstallationInspection Before startingWipe up any spilled fuel immediately Battery CheckOperation in Freezing Weather Cleaning the RadiatorAir Cleaner Fan Belt Tension CoolantLocation of Female Connectors Outriggers and Support Stands OperationStarting the Engine Mast operationStowing the Mast to Horizontal Position Deploying the Mast to Vertical PositionRaising the Mast Lowering the MastMast Operation AUXILIARY Output Receptacles Turning On the LampsEmergency Shutdown Normal ShutdownFrequency MaintenanceBasic Inspection and Maintenance Inspection/MaintenanceGeneral Inspection Service DailyAir Cleaner Cleaning the Fuel StrainerReplacing Fuel Filter Changing OilLower the mast to the horizontal resting position Check Cable WearServicingthe Mast Raise/Lower Cable System Servicingthe Mast Extension Cable SystemRemoval From Long Term Storage StorageAdjustable Channel Maintenance TrailersWheel Hub Adjustment Leaf Suspension Components Leaf SuspensionSymptom Possible Problem Solution Generator TroubleshootingSymptom Possible Cause Solution Engine TroubleshootingEngine revolution is not Lamp Troubleshooting Lamp starts slowly ARC does not strike Defective Lamp? When switch is first Checking voltage and ballast Turned onReplacement minimizes color differences Clean fixtureBallast Removal Lamp Troubleshooting GuideConnections StartingStator Light tower wiring diagramWHT GRN BLK Lombardini engine wiring diagram „ Driving too fast for the conditions obey local speed laws Trailer guidelinesCOmmOn CauSeS for Loss of TRaILeR TRaILeR TOWIng guIDeLIneSCOupLIng to THe TOW veHICLe DRIvIng COnDITIOnSTRaILeR TOWIng TIpS InOpeRabLe bRaKeS, LIgHTS or mIRRORSTRaILeR vIn Tag SIDe vIeW mIRRORS ELeCTRICaL COnneCTORTOW veHICLe SuSpenSIOn SYSTemJaCKSTanD SaFeTY CHaInSCOupLeR TYpeS Coupling the Trailer to the Tow vehicle ball Coupler Lock washer and hitch frameConnecting Trailer Lights Attaching Safety ChainUncoupling the ball Hitch Pintle Coupler and pintle Hook PInTLe Hitch COupLeRCoupling Trailer to Tow vehicle pintle Coupler TIRe SaFeTY Unsafe Tires, Lug nuts or WheelsBe sure lug nuts are tight before each tow Determining Load Limit of TrailerStep Tighten lug nuts before each towTIRe FunDamenTaLS Determining Load Limit of Tow vehicle StepP indicates the tire is for passenger vehicles Table a. Speed Rating Uniform Tire Quality grading Standards uTQgSLetter Rating Speed Rating Replacing Worn or Damaged Tires Tire Safety TipsTable b. Tire Wear Troubleshooting Tire RepairLug nut Torque Requirements Lights and SignalsWheel Rims Wheels, bearings and Lug nutsFigure L. Trailer to Tow Vehicle Wiring Diagram HERE’S HOW to GET Help

LT12DAB specifications

The Multiquip LT12DAB is an innovative and reliable light tower designed to deliver efficient lighting solutions for various outdoor applications. Known for its robust construction and user-friendly features, the LT12DAB is ideal for construction sites, events, and emergency situations, providing flexibility and performance in a compact package.

One of the standout features of the LT12DAB is its powerful lighting system. It is equipped with four high-intensity LED lights, each delivering up to 12,000 lumens, ensuring ample illumination for expansive areas. The LED technology not only enhances visibility but also offers advantages in power consumption, resulting in reduced energy costs and longer operational life. The tower can be raised up to 30 feet, enabling it to cast a broad beam of light across large outdoor spaces.

The LT12DAB is built with advanced mobility in mind. It features a durable, weather-resistant frame that can withstand various environmental conditions, making it suitable for use in diverse locations. The all-terrain wheels provide enhanced maneuverability, allowing operators to transport the unit easily across job sites or uneven terrains. Additionally, the lightweight design ensures that it can be easily handled by a small crew.

Powering the LT12DAB is a reliable and fuel-efficient diesel generator that provides extended run times without frequent refueling. This generator not only supports the lighting system but can also power additional tools and equipment, adding versatility to its functionality. The unit is designed with low noise emissions, making it ideal for operation in noise-sensitive areas.

Ease of use is paramount in the design of the LT12DAB. The intuitive control panel allows users to operate the lights and generator effortlessly. The telescopic mast can be raised or lowered quickly, with safety features in place to prevent accidental collapse. Moreover, the integrated sensors monitor the oil levels and engine temperature, providing alerts for maintenance needs.

In summary, the Multiquip LT12DAB combines powerful lighting capabilities with robust construction and user-friendly features. Its mobility, energy efficiency, and reliability make it a valuable tool for any outdoor project, ensuring that worksites remain well-lit and safe, regardless of the conditions. Whether for construction, events, or emergencies, the LT12DAB stands out for its performance and adaptability, meeting the demands of today’s professional environments.
Top Page Image Contents