Multiquip DCA220SSCU4i manual Output Terminal Familiarization

OUTPUT TERMINAL PANEL FAMILIARIZATION

Output Terminal Panel

The Output Terminal Panel (Figure 7) shown below is located on the right-hand side (left from control panel) of the generator. Lift up on the cover to gain access to receptacles and terminal lugs.

NOTICE

Terminal legs “O” and “Ground” are considered bonded grounds

Output Terminal Familiarization

The “Output Terminal Panel ” (Figure 7) is provided with the following:

„„Three (3) 240/139V output receptacles @ 50 amp „„Three (3) Circuit Breakers @ 50 amps

„„Two (2) 120V GFCI receptacles @ 20 amp „„Two (2) GFCI Circuit Breakers @ 20 amps „„Eight (8) Output Terminal Lugs ( U, V, W, O, Ground)

1Ø AND 3Ø,			NEUTRAL	GROUND
480 -120 VAC
			TERMINAL
OUTPUT TERMINALS				TERMINAL
				HARD WIRE
				HOOKUP PANEL
U	V	W	O

BLACK RED BLUE WHITE GREEN

CIRCUIT BREAKERS

FOR GFCI RECEPTACLES

Y

WX

CS-6369

TWIST-LOCK

CIRCUIT BREAKERS

FOR CS-6369 TWIST

LOCK RECEPTACLES

120 VAC, 20 AMP

GFCI RECEPTACLES

AUX. POWER RECEPTACLES

240/139V, 50 AMPS

Figure 6. Output Terminal Panel

page 20 — dca220sscu/4i 60 hz generator • operation and Parts manual — rev. #0 (10/25/12)