Multiquip operation manual DCA-180SSV Generator Outputs

DCA-180SSV — GENERATOR OUTPUTS

Generator OutputVoltages

A wide range of voltages are available to supply voltage for many different applications. Voltages are selected by apply- ing jumpers (6) to the voltage change-over board (Figure 14). To obtain some of the voltages as listed in Table 6 (see below) will require a fine adjustment using the voltage regu- lator (VR) control knob located on the control panel.

Voltage Change-Over Board

The voltage change-over board (Figure 14) is located on the control box, behind the generator control panel. This board has been provided for ease of voltage selection.

Generator Amperage

Tables 8 and 9 describe the generator’s current output capa- bility for both 1Ø-phase and 3Ø phase applications.

Table 8. Generator Ampere Ratings ⎯ 1∅

kW	120V	240V
18	150	75
38	316	158
58	483	267
78	650	236
98	817	492
118	983	319
138	1,150	575
158 (Max)	1,317	658

Figure 14. Voltage Change-Over Board

CAUTION - CHANGINGVOLTAGES

NEVER attempt to place jumper plates on the voltage change-over board while the generator is in operation. There exist the possibility of electrocution, electrical shock or burn, which can cause severe bodily harm or even death!

Table 7. Voltages Available

Three Phase	208V	220V	240V	416V	440V	480V
(Switchable)
Single Phase	120V	127V	139V	240V	254V	277V
(Switchable)

Table 9. Generator Ampere Ratings ⎯ 3∅

KVA	240V	480V
20	48	24
40	96	48
60	144	72
80	192	96
100	241	120
120	289	144
140	337	168
160	384	192
180 (Max)	433	216

PAGE 28 — DCA-180SSV— OPERATION AND PARTS MANUAL — REV. #1 (04/14/10)