Jacuzzi 2 Wall and 3 Wall manual Notch

Page 11

2 WALL: TOWER, FIXED WALL AND CURVED GLASS INSTALLATION

STEP 4

Slide the glass panel into the wall post. Make sure that the corner notch is positioned toward the base of the tower.

NOTCH

STEP 5

Place the tower onto base. Ensure the curved glass locates into the glazing channel. Install bolt but do not tighten.

BOLT (5/16")

WASHER

GLAZING

CHANNEL

STEP 6

Insert tower support rail into glass panel rail but do not tighten at this time.

GLASS PANEL

SUPPORT RAIL

TOWER SUPPORT RAIL

STEP 7

Insert support rails into brackets in top moulding of tower but do not tighten at this time. Front and tower support rails may have to be cut if they are too long.

TOWER SUPPORT RAIL

FRONT RAIL

GLASS PANEL

SUPPORT RAIL

STEP 8

Slide mounting bracket covers and mounting brackets onto front rail and tower support rail.

MOUNTING

BRACKET

RAIL COVER

RAIL WALL

MOUNTING BRACKET

9

Image 11

Contents Summer Rain Wall & 3 Wall WALK-IN Shower Systems Important Safety Information Save These Instructions for Future Use ContentsTotal Weight Floor Loading Wall SpecificationsWall ROUGH-IN Reference Wall Component Identification Step Wall Base InstallationIncorrect CLEAN-UP After Installation Wall TOWER, Fixed Wall and Curved Glass Installation Notch Adjust the rails until tower is vertical in 2 planes Cover CAP Step 140 lb 64 kg Wall ROUGH-IN Reference Wall Component Identification 5x5 Opening MIN. AS Possible Incorrect Cement Board Stud Silicone Sealant Minimum GAP Wall Tower and Curved Glass Installation Tower Support Rail Front Rail Secure the rails Install cover cap on wall post Step Body Sprays 2 Upper & 2 Lower Wall OperationAuthorized Service Wall MaintenanceTower Assembly Washer Part of D709827 Tower Fixtures Repair PartsTower Plumbing Repair Parts Wall Unit Repair Parts Wall Unit Repair Parts Jacuzzi Whirlpool Bath Responsibilities of Others