2 & 3 WALL OPERATION
Shower Head
There are four selectable positions: Jet, normal pulsating and aerated flow.
Body Sprays (2 Upper & 2 Lower)
To adjust the flow and intensity, turn as shown. The spray can also be turned to change the direction of the spray.
LESS FLOW AND INTENSITY
MORE FLOW AND INTENSITY
Diverter Control
To turn On water, turn the inner knob clockwise and adjust for more or less flow.
The outer knob will divert the water to body sprays, shower head (shown in this position) and foot temperature tester. If the knob is pointing anywhere between main functions, the amount of water
will be proportional to where the knob is pointing. If the knob is 
STOP RELEASE pointing to the white line between positions, the water will be
diverted equally to both functions on either side of the white line.
SHOWER
HEAD
BODY
SPRAY
OUTER
KNOB
FOOT TEMPERATURE TESTER
INNER
KNOB
Temperature Valve
The temperature of the mixed water is adjusted by means of the graduated handle. This handle has a safety stop set at 100°F (38°C). To increase the temperature, press the red button to release the stop and keep turning the handle.
Foot Temperature Testor
23