Jacuzzi 2 Wall and 3 Wall manual Step

Page 14

2 WALL: TOWER, FIXED WALL AND CURVED GLASS INSTALLATION

STEP 16

Turn on water supply and check for leaks. Correct any leaks before installing tower cover.

STEP 17

Install tower cover as shown. Insert cover at top first.

TOWER TOP PLATE

TOWER COVER

INSERT THIS SIDE FIRST

TOWER COVER

STEP 18

Seal all around the base of tower with silicone sealant. Also seal the inside of both wall posts, glass post and the bottom of both glass panels on the inside only.

	APPLY SEALANT
	ALONG BASE
	AND SIDE OF
	WALL POST
	APPLY SEALANT
	ALONG BASE		APPLY SEALANT
	OF GLASS		APPLY SEALANT
	OF GLASS		ALONG BASE
			ALONG BASE
			OF GLASS
	APPLY SEALANT	APPLY SEALANT		APPLY SEALANT
	AROUND	ALL AROUND		ALONG BASE
	GLASS POST	ALL AROUND		ALONG BASE
	GLASS POST	TOWER BASE		AND SIDE OF
		TOWER BASE		AND SIDE OF
				WALL POST
	(RAILS NOT SHOWN)
		TOP VIEW

12

Image 14

Contents Summer Rain Wall & 3 Wall WALK-IN Shower Systems Important Safety Information Contents Save These Instructions for Future UseWall Specifications Total Weight Floor LoadingWall ROUGH-IN Reference Wall Component Identification Wall Base Installation StepIncorrect CLEAN-UP After Installation Wall TOWER, Fixed Wall and Curved Glass Installation Notch Adjust the rails until tower is vertical in 2 planes Cover CAP Step 140 lb 64 kg Wall ROUGH-IN Reference Wall Component Identification 5x5 Opening MIN. AS Possible Incorrect Cement Board Stud Silicone Sealant Minimum GAP Wall Tower and Curved Glass Installation Tower Support Rail Front Rail Secure the rails Install cover cap on wall post Step Wall Operation Body Sprays 2 Upper & 2 LowerWall Maintenance Authorized ServiceTower Fixtures Repair Parts Tower Assembly Washer Part of D709827Tower Plumbing Repair Parts Wall Unit Repair Parts Wall Unit Repair Parts Jacuzzi Whirlpool Bath Responsibilities of Others