3 WALL SPECIFICATIONS
Important: Read complete instructions before beginning installation.
Each unit arrives ready for installation, equipped with base, glass and associated hardware.
Remove the unit from the carton. Retain the shipping carton until satisfactory inspection of the product has been made.
Immediately upon receipt, inspect the base and other components before installing. Check all carton inserts for parts and hardware. Should inspection reveal any damage or defect in any component, do not install the unit. Damage or defect to any component claimed after the unit is installed is excluded from the warranty. Jacuzzi Whirlpool Bath's responsibility for shipping damage ceases upon delivery of the products in good order to the carrier. Refer any claims for damage to the carrier. For definitions of warranty coverage and limitations, refer to the published warranty information packed with the product.
Jacuzzi Whirlpool Bath is not responsible for any defect that could have been discovered, repaired, or avoided by following this inspection.
BASE SPECIFICATIONS
DIMENSIONS
60" (1219 mm) L
4" ( 102 mm) H
PRODUCT WEIGHT (Base + Enclosure )
140lb
(64 kg)
TOTAL WEIGHT/
FLOOR LOADING
340lb
(155 kg)/
23lb/sq. ft. (97 kg/sq. m)
NOTE: MINIMUM WATER PRESSURE FOR THE SYSTEM IS 40 PSI.
| L |
|
45° ELBOW |
| |
|
| |
2 PROVIDED |
| |
(LOOSE) |
|
|
1/2" RIGID
COPPER PIPE
UNDER BASE
W
TOP VIEW
H
FRONT VIEW
13