Harbor Freight Tools 93507 operating instructions Adjusting The Blade Tracking, See Figure R, next

Page 18

4.NOTE: There should be from .000” (just touching) to .001” clearance between the Saw Blade and Blade Guide Bearings (133). To obtain this clearance adjust as follows:

A.The Outer Blade Guide Bearings (133) are mounted to Eccentric Shafts (136) and can be adjusted. (See Figure Q.)

B.Loosen the Nut (137) while holding the Eccentric Shaft (136) with an Allen wrench (not included). (See Figure Q.)

C.Position the Eccentric Shaft (136) by turning it to the desired position of clear- ance. Then, retighten the Nut (137). (See Figure Q.)

D.Adjust the second Blade Guide Bearing (133) in the same manner.

BLADE

GUIDE BEARING

(133)Hex Socket

Screw (140*)

NUT (137)

SAW BLADE

(127) ECCENTRIC SHAFT (136)

BLADE GUIDE BEARING (133)

FIGURE Q

*Screw (140) along with Screw (161) are used to adjust the vertical align- ment of the Saw Blade (127). This alignment is set at the factory and will not normally need adjustment. If adjustment is needed, however, these two Screws (140,161) can be loosened, the Blade Adjusting Seats (134, 143) brought into perpendicular alignment with theTable (39), and the Screws retightened.

Adjusting The Blade Tracking:

1.Raise the Saw Head to its full vertical position, making sure it locks in position by turning the Hydraulic Cylinder (20) to its “OFF” position. (See Figure O.)

2.Turn on the Bandsaw. The Saw Blade (127) is tracking properly when the back of the Blade is just touching the edge of the Wheel (175) flange.

(See Figure R, next page.)

3.If adjustment is necessary, the Blade Guide Bearings (133) should be clear of the Saw Blade (124). (See Figure Q.)

4.Loosen the upper Screw (168) to a point where it is loose but snug.

(See Figure R.)

5.With the Bandsaw running, turn the Adjusting Screw (168) until the Saw Blade

(127)is tracking properly, making sure Blade tension is maintained by turning the Blade Tension Knob (181). (See Figure R, next page.)

6.Make sure to retighten the upper Screw (168) when adjustment is complete.

(See Figure R.)

SKU 93507

For technical questions, please call 1-800-444-3353.

Page 18

Page 17 Page 19
Image 18
Page 17 Page 19
Contents Metal Cutting Bandsaw For technical questions, please callContents Save this Manual Product SpecificationsGeneral Safety Rules Work AreaElectrical Safety Personal SafetyService Tool USE and CareSpecific Safety Rules Page Grounding Grounded Tools Tools With Three Prong PlugsSee Figure C, next Double Insulated Tools Tools With Two Prong PlugsExtension Cords See Figure CFeet SymbologyNameplate Extension Cord Length 120 or 240 VoltAssembly Instructions UnpackingAttach The Wheels Remove The Shipping Bolt Attach The Pulley CoverSee Figure F Install The Coolant Tank Attach The Tool Stop Rod And BlockSee Figure H Wiring Instructions Figure JUsing The Quick Vise Operating InstructionsSelecting Proper Blade Speeds Adjusting The Quick Vise For An Angle Cut Adjusting The Stop BlockAdjusting The Blade Guide Bearings Converting The Bandsaw For Vertical UseSee Figure R Adjusting The Blade TrackingSee Figure R, next See Figure R SKU For technical questions, please callAdjusting The Blade Tension Adjusting The Feed RateSee Figure T Adjusting The Blade Guide BracketsBasic Bandsaw Operation -- Vertical Position See Figure U, nextSee Figure U Figure UBasic Bandsaw Operation -- Horizontal Position See Figure INSPECTION, MAINTENANCE, and Cleaning Do not use damaged equipmentSee Figure W Figure WRemove the old V-Belt 183 from the two Pulleys 184 See Figure Z, next SKU For technical questions, please call Figure YPlease Read the Following Carefully See Figure ZTroubleshooting Problem Possible Causes Possible SolutionParts List Part Description QtyREV 10/06 Assembly Diagram Assembly Diagram Limited 90 day/1 Year warranty Warranty

93507 specifications

Harbor Freight Tools 93507 is a powerful portable generator designed for convenience and reliability during power outages or outdoor activities. This generator is an ideal choice for homeowners, campers, and DIY enthusiasts, providing an efficient power solution in various situations.

The Harbor Freight Tools 93507 boasts a robust 4000 running watts and 5000 starting watts, ensuring a steady power supply for critical appliances and tools. Equipped with a reliable 7 HP, 196cc OHV engine, this generator delivers efficient performance while maintaining a relatively low noise level, making it suitable for both residential and recreational use.

One of the most notable features of the 93507 is its low oil shutdown system. This technology automatically turns off the engine to prevent damage caused by low oil levels, ensuring longevity and reducing maintenance concerns for users. Additionally, this generator includes a built-in fuel gauge, allowing users to monitor fuel levels with ease and helping to prevent unexpected shutdowns during operation.

Portability is another key characteristic of the Harbor Freight Tools 93507. It is designed with a compact and lightweight frame, making it easy to transport to job sites, camping trips, or any location where power is needed. The generator features a sturdy handle and flat-free tires, allowing for effortless maneuverability over various terrains.

The 93507 also comes equipped with multiple output options, including two 120V AC outlets and one 12V DC outlet. This variety allows users to connect a wide range of devices, from household appliances to outdoor equipment. The generator's surge protection feature ensures that sensitive electronics are safeguarded against power spikes, providing peace of mind for users.

In terms of fuel efficiency, the Harbor Freight Tools 93507 can run for up to 12 hours on a full tank, depending on the load. This impressive runtime means less frequent refueling, enhancing its usability during extended outdoor excursions or emergency situations.

Overall, the Harbor Freight Tools 93507 generator combines power, portability, and safety into a reliable tool for all your energy needs. With its durable design and advanced features, it stands out as an exceptional choice for anyone seeking a dependable portable power source.
Top Page Image Contents