Harbor Freight Tools 93507 Remove the old V-Belt 183 from the two Pulleys 184

Page 26

g.NOTE: The Bandsaw is equipped with a 93” diameter, .032” thick, 3/4” wide, 8 tooth per inch Saw Blade (127). The machine will also accept Blades in 4, 6, 8, and 10 tooth sizes. The choice of Blade pitch is determined by the thickness of the material to be cut. The thinner the workpiece, the more teeth is recom- mended. A minimum of 3 teeth should engage the workpiece at all times for proper cutting. If the teeth of the Saw Blade are so far apart that they straddle the workpiece, severe damage to the workpiece and/or Saw Blade will result.

(See Figure W.)

h.Tighten the tension on the new Saw Blade (127) by turning the Blade Tension Knob (181). (See Figure W.)

i.Close the Wheel Cover (129). (See Figure W.)

4.To replace the V-Belt:The Bandsaw uses a size 3V270 V-Belt (183). To replace the V-Belt:

a.Open the Pulley Cover (189). (See Figure X.)

b.Loosen the Hex Head Screw to release tension on the old V-Belt.

(See Figure X.)

c.Remove the old V-Belt (183) from the two Pulleys (184, 185).

(See Figure X.)

d.Place the new V-Belt (183) into the proper Pulley (184, 185) combination for the desired Blade speed. (See Figure K.)

e.Adjust the position of the Motor (192) to obtain approximately 1/2” depression in the V-Belt (183) when applying pressure with your thumb. (See Figure X.)

f.Tighten the Hex Head Screw to secure the Motor (192) in place.

(See Figure X.)

 

 

PULLEY COVER

 

 

V-BELT

(189)

 

 

(183)

MOTOR PULLEY

 

 

(185)

PULLEY

(184)

HEX HEAD SCREW

FIGURE X

SKU 93507

For technical questions, please call 1-800-444-3353.

Page 26

Page 25 Page 27
Image 26
Page 25 Page 27
Contents Metal Cutting Bandsaw For technical questions, please callContents Save this Manual Product SpecificationsGeneral Safety Rules Work AreaElectrical Safety Personal SafetyService Tool USE and CareSpecific Safety Rules Page Grounding Grounded Tools Tools With Three Prong PlugsSee Figure C, next Double Insulated Tools Tools With Two Prong PlugsExtension Cords See Figure CFeet SymbologyNameplate Extension Cord Length 120 or 240 VoltAttach The Wheels Assembly InstructionsUnpacking See Figure F Remove The Shipping BoltAttach The Pulley Cover See Figure H Install The Coolant TankAttach The Tool Stop Rod And Block Wiring Instructions Figure JSelecting Proper Blade Speeds Using The Quick ViseOperating Instructions Adjusting The Quick Vise For An Angle Cut Adjusting The Stop BlockAdjusting The Blade Guide Bearings Converting The Bandsaw For Vertical UseSee Figure R Adjusting The Blade TrackingSee Figure R, next See Figure R SKU For technical questions, please callAdjusting The Blade Tension Adjusting The Feed RateSee Figure T Adjusting The Blade Guide BracketsBasic Bandsaw Operation -- Vertical Position See Figure U, nextSee Figure U Figure UBasic Bandsaw Operation -- Horizontal Position See Figure INSPECTION, MAINTENANCE, and Cleaning Do not use damaged equipmentSee Figure W Figure WRemove the old V-Belt 183 from the two Pulleys 184 See Figure Z, next SKU For technical questions, please call Figure YPlease Read the Following Carefully See Figure ZTroubleshooting Problem Possible Causes Possible SolutionParts List Part Description QtyREV 10/06 Assembly Diagram Assembly Diagram Limited 90 day/1 Year warranty Warranty

93507 specifications

Harbor Freight Tools 93507 is a powerful portable generator designed for convenience and reliability during power outages or outdoor activities. This generator is an ideal choice for homeowners, campers, and DIY enthusiasts, providing an efficient power solution in various situations.

The Harbor Freight Tools 93507 boasts a robust 4000 running watts and 5000 starting watts, ensuring a steady power supply for critical appliances and tools. Equipped with a reliable 7 HP, 196cc OHV engine, this generator delivers efficient performance while maintaining a relatively low noise level, making it suitable for both residential and recreational use.

One of the most notable features of the 93507 is its low oil shutdown system. This technology automatically turns off the engine to prevent damage caused by low oil levels, ensuring longevity and reducing maintenance concerns for users. Additionally, this generator includes a built-in fuel gauge, allowing users to monitor fuel levels with ease and helping to prevent unexpected shutdowns during operation.

Portability is another key characteristic of the Harbor Freight Tools 93507. It is designed with a compact and lightweight frame, making it easy to transport to job sites, camping trips, or any location where power is needed. The generator features a sturdy handle and flat-free tires, allowing for effortless maneuverability over various terrains.

The 93507 also comes equipped with multiple output options, including two 120V AC outlets and one 12V DC outlet. This variety allows users to connect a wide range of devices, from household appliances to outdoor equipment. The generator's surge protection feature ensures that sensitive electronics are safeguarded against power spikes, providing peace of mind for users.

In terms of fuel efficiency, the Harbor Freight Tools 93507 can run for up to 12 hours on a full tank, depending on the load. This impressive runtime means less frequent refueling, enhancing its usability during extended outdoor excursions or emergency situations.

Overall, the Harbor Freight Tools 93507 generator combines power, portability, and safety into a reliable tool for all your energy needs. With its durable design and advanced features, it stands out as an exceptional choice for anyone seeking a dependable portable power source.
Top Page Image Contents