Harbor Freight Tools 93507 Product Specifications, General Safety Rules, Save this Manual

Page 3

PRODUCT SPECIFICATIONS

Electrical Requirements

120/230 VAC (Dual voltage capability)

 

Motor Type: 1 HP /Single Phase

 

60 Hz / 1720 RPM

 

9 Amps @ 120 Volt

 

4.5 Amps @ 230 Volt

 

Power Cord Type & Length Provided: 120 volt / 6’4” Long

 

Power Cord Plug Type Provided: 120 volt, 3-Prong

 

Overload Equipped: Resettable Circuit Breaker

Cutting Capacity

7” (Round Stock) 7” x 12” (Flat/Square Stock)

Blade Speeds (FPM)

260 / 178 / 132 / 86

Required Blade Size

¾” Wide x .032” Thick x 93” Long (Included)

Required V-Belt Size

3V-270 (Included)

Vise Capacity/Miter Angles

10-1/2” / 0-45 Degrees in 1 Degree Increments (Right Only)

Throat Depth

9-5/8”

Coolant Pump

120 VAC / 60 Hz / 0.6 Amps

Coolant Tank Capacity

9 Quarts

Overall Dimensions

15-1/2” Long x 46-1/2” Wide x 62-7/8” High

Net Weight

312 Pounds

SAVE THIS MANUAL

You will need this manual for the safety warnings and precautions, assembly, oper- ating, inspection, maintenance and cleaning procedures, parts list and assembly diagram. Keep your invoice with this manual. Write the invoice number on the inside of the front cover. Keep this manual and invoice in a safe and dry place for future reference.

GENERAL SAFETY RULES

WARNING!

READ AND UNDERSTAND ALL INSTRUCTIONS

Failure to follow all instructions listed below may result in

electric shock, fire, and/or serious injury.

SAVE THESE INSTRUCTIONS

WORK AREA

1.Keep your work area clean and well lit. Cluttered benches and dark areas invite accidents.

2.Do not operate power tools in explosive atmospheres, such as in the pres- ence of flammable liquids, gases, or dust. Power tools create sparks which may ignite the dust or fumes.

3.Keep bystanders, children, and visitors away while operating a power tool. Distractions can cause you to lose control. Protect others in the work area from debris such as chips and sparks. Provide barriers or shields as needed.

SKU 93507

For technical questions, please call 1-800-444-3353.

Page

Page 2 Page 4
Image 3
Page 2 Page 4
Contents For technical questions, please call Metal Cutting BandsawContents Work Area Product SpecificationsGeneral Safety Rules Save this ManualPersonal Safety Electrical SafetyTool USE and Care ServiceSpecific Safety Rules Page Grounded Tools Tools With Three Prong Plugs GroundingSee Figure C Double Insulated Tools Tools With Two Prong PlugsExtension Cords See Figure C, next120 or 240 Volt SymbologyNameplate Extension Cord Length FeetAssembly Instructions UnpackingAttach The Wheels Remove The Shipping Bolt Attach The Pulley CoverSee Figure F Install The Coolant Tank Attach The Tool Stop Rod And BlockSee Figure H Figure J Wiring InstructionsUsing The Quick Vise Operating InstructionsSelecting Proper Blade Speeds Adjusting The Stop Block Adjusting The Quick Vise For An Angle CutConverting The Bandsaw For Vertical Use Adjusting The Blade Guide BearingsSee Figure R SKU For technical questions, please call Adjusting The Blade TrackingSee Figure R, next See Figure RAdjusting The Feed Rate Adjusting The Blade TensionSee Figure U, next Adjusting The Blade Guide BracketsBasic Bandsaw Operation -- Vertical Position See Figure TFigure U See Figure UBasic Bandsaw Operation -- Horizontal Position See Figure Do not use damaged equipment INSPECTION, MAINTENANCE, and CleaningFigure W See Figure WRemove the old V-Belt 183 from the two Pulleys 184 Figure Y See Figure Z, next SKU For technical questions, please callSee Figure Z Please Read the Following CarefullyProblem Possible Causes Possible Solution TroubleshootingPart Description Qty Parts ListREV 10/06 Assembly Diagram Assembly Diagram Warranty Limited 90 day/1 Year warranty

93507 specifications

Harbor Freight Tools 93507 is a powerful portable generator designed for convenience and reliability during power outages or outdoor activities. This generator is an ideal choice for homeowners, campers, and DIY enthusiasts, providing an efficient power solution in various situations.

The Harbor Freight Tools 93507 boasts a robust 4000 running watts and 5000 starting watts, ensuring a steady power supply for critical appliances and tools. Equipped with a reliable 7 HP, 196cc OHV engine, this generator delivers efficient performance while maintaining a relatively low noise level, making it suitable for both residential and recreational use.

One of the most notable features of the 93507 is its low oil shutdown system. This technology automatically turns off the engine to prevent damage caused by low oil levels, ensuring longevity and reducing maintenance concerns for users. Additionally, this generator includes a built-in fuel gauge, allowing users to monitor fuel levels with ease and helping to prevent unexpected shutdowns during operation.

Portability is another key characteristic of the Harbor Freight Tools 93507. It is designed with a compact and lightweight frame, making it easy to transport to job sites, camping trips, or any location where power is needed. The generator features a sturdy handle and flat-free tires, allowing for effortless maneuverability over various terrains.

The 93507 also comes equipped with multiple output options, including two 120V AC outlets and one 12V DC outlet. This variety allows users to connect a wide range of devices, from household appliances to outdoor equipment. The generator's surge protection feature ensures that sensitive electronics are safeguarded against power spikes, providing peace of mind for users.

In terms of fuel efficiency, the Harbor Freight Tools 93507 can run for up to 12 hours on a full tank, depending on the load. This impressive runtime means less frequent refueling, enhancing its usability during extended outdoor excursions or emergency situations.

Overall, the Harbor Freight Tools 93507 generator combines power, portability, and safety into a reliable tool for all your energy needs. With its durable design and advanced features, it stands out as an exceptional choice for anyone seeking a dependable portable power source.
Top Page Image Contents