Harbor Freight Tools 93507 operating instructions See Figure U

(See Figure U.)

5.Turn the Coolant Pump Valve (159) to its “OPEN” position. Then, turn the Cool- ant Pump Toggle Switch (11) to its “ON” position. (See Figure U.)

6.Turn the Motor Toggle Switch (37) to its “ON” position. (See Figure U.)

7.WARNING! Cut only flat workpieces when the Bandsaw is in its vertical position. Never attempt to cut pipes or other round objects with the Bandsaw in its vertical position.

8.Before cutting, turn on the Bandsaw and check for excessively loose Saw Blade (127) tension or machine vibration. If this is found, turn off the Bandsaw and correct the problem before using. (See Figure U.)

9.Set the workpiece on the Large Vertical Cutting Plate (182), making sure to keep downward pressure on the workpiece throughout the cutting process.

(See Figure U.)

SAW BLADE

(127)

LARGE VERTICAL CUTTING PLATE

(182)

MOTOR

TOGGLE

SWITCH

(37)

HYDRAULIC CYLINDER

SAW HEAD ASSEMBLY

COOLANT PUMP

VALVE

(159)

COOLANT PUMP TOGGLE SWITCH (11)

FIGURE U

(20)

POWER CORD PLUG

(38)

REV 10/06

SKU 93507 For technical questions, please call 1-800-444-3353. Page 21