b.Remove the white lid at the top of the Coolant Tank (107), and dispose of the old Coolant properly in a container. (See Figure Z.)
c.Fill the Coolant Tank (107) to about 80% capacity with a clean
(See Figure Z.)
d.Slide the Coolant Tank (107) back under the Table (39) of the Bandsaw. Then insert the Hose (102) through the hole in the white lid. (See Figure Z.)
HOSE
(102) WHITE LID
COOLANT TANK
(107)
FIGURE Z
7.To clean the exterior parts of the Bandsaw, use only a clean cloth and mild detergent or mild solvent to clean the body of the Saw. Do not immerse any electrical part of the machine in any liquids.
8.WARNING! All maintenance, service, or repairs not mentioned in this manual must only be performed by a qualified service technician.
PLEASE READ THE FOLLOWING CAREFULLY
THE MANUFACTURER AND/OR DISTRIBUTOR HAS PROVIDED THE PARTS LIST AND ASSEMBLY DIAGRAM IN THIS MANUAL AS A REFERENCE TOOL ONLY. NEI- THER THE MANUFACTURER OR DISTRIBUTOR MAKES ANY REPRESENTATION OR WARRANTY OF ANY KIND TO THE BUYER THAT HE OR SHE IS QUALIFIED TO REPLACE ANY PARTS OF THE PRODUCT. IN FACT, THE MANUFACTURER AND/ OR DISTRIBUTOR EXPRESSLY STATES THAT ALL REPAIRS AND PARTS REPLACE- MENTS SHOULD BE UNDERTAKEN BY CERTIFIED AND LICENSED TECHNICIANS, AND NOT BY THE BUYER. THE BUYER ASSUMES ALL RISKS AND LIABILITY ARISING OUT OF HIS OR HER REPAIRS TO THE ORIGINAL PRODUCT OR RE- PLACEMENT PARTS THERETO, OR ARISING OUT OF HIS OR HER INSTALLATION OF REPLACEMENT PARTS THERETO.
SKU 93507 | For technical questions, please call | Page 28 |