Harbor Freight Tools 93507 operating instructions See Figure W

Page 25

3.Before each use, inspect the Saw Blade (127). Using a dull Saw Blade will cause excessive wear on the Motor of the Bandsaw and will not produce a satisfactory cut. Replace with a new Saw Blade when needed. To replace a Saw Blade:

a.NOTE: Make sure to wear heavy duty work gloves to avoid accidental cuts from the Saw Blade (127) when performing this procedure.

b.Turn the Hydraulic Cylinder (20) to its “ON” position, and raise the Saw Head to its full vertical position. Then, turn the Hydraulic Cylinder (20) to its “OFF” position to lock the Saw Head in place. (See Figure V.)

c.Open the Wheel Cover (129). (See Figure W.)

d.Release Saw Blade (127) tension by turning the Blade Tension Knob (181).

(See Figure W.)

e.Slip the old Saw Blade (127) off the Upper Blade Wheel (175), Lower Blade Wheel (124), and Guide assemblies. (See Figure W.)

f.Place the new Saw Blade (127) between each of the Guide assemblies and around the Upper Blade Wheel (175) and Lower Blade Wheel (124).

IMPORTANT: The teeth must be pointing downward toward the Motor. (See Figure W.)

BLADE TENSION KNOB

(181)

UPPER BLADE WHEEL

(175)

UPPER

GUIDE

ASSY.

LOWER

 

SAW

 

WHEEL COVER

 

BLADE

 

GUIDE

 

(129)

 

(127)

ASSY.

 

 

 

 

 

 

LOWER BLADE WHEEL

 

 

 

 

(124)

 

 

 

 

FIGURE W

SKU 93507

For technical questions, please call 1-800-444-3353.

Page 25

Page 24 Page 26
Image 25
Page 24 Page 26
Contents For technical questions, please call Metal Cutting BandsawContents General Safety Rules Product SpecificationsSave this Manual Work AreaPersonal Safety Electrical SafetyTool USE and Care ServiceSpecific Safety Rules Page Grounded Tools Tools With Three Prong Plugs GroundingExtension Cords Double Insulated Tools Tools With Two Prong PlugsSee Figure C, next See Figure CNameplate Extension Cord Length SymbologyFeet 120 or 240 VoltUnpacking Assembly InstructionsAttach The Wheels Attach The Pulley Cover Remove The Shipping BoltSee Figure F Attach The Tool Stop Rod And Block Install The Coolant TankSee Figure H Figure J Wiring InstructionsOperating Instructions Using The Quick ViseSelecting Proper Blade Speeds Adjusting The Stop Block Adjusting The Quick Vise For An Angle CutConverting The Bandsaw For Vertical Use Adjusting The Blade Guide BearingsSee Figure R, next Adjusting The Blade TrackingSee Figure R See Figure R SKU For technical questions, please callAdjusting The Feed Rate Adjusting The Blade TensionBasic Bandsaw Operation -- Vertical Position Adjusting The Blade Guide BracketsSee Figure T See Figure U, nextFigure U See Figure UBasic Bandsaw Operation -- Horizontal Position See Figure Do not use damaged equipment INSPECTION, MAINTENANCE, and CleaningFigure W See Figure WRemove the old V-Belt 183 from the two Pulleys 184 Figure Y See Figure Z, next SKU For technical questions, please callSee Figure Z Please Read the Following CarefullyProblem Possible Causes Possible Solution TroubleshootingPart Description Qty Parts ListREV 10/06 Assembly Diagram Assembly Diagram Warranty Limited 90 day/1 Year warranty

93507 specifications

Harbor Freight Tools 93507 is a powerful portable generator designed for convenience and reliability during power outages or outdoor activities. This generator is an ideal choice for homeowners, campers, and DIY enthusiasts, providing an efficient power solution in various situations.

The Harbor Freight Tools 93507 boasts a robust 4000 running watts and 5000 starting watts, ensuring a steady power supply for critical appliances and tools. Equipped with a reliable 7 HP, 196cc OHV engine, this generator delivers efficient performance while maintaining a relatively low noise level, making it suitable for both residential and recreational use.

One of the most notable features of the 93507 is its low oil shutdown system. This technology automatically turns off the engine to prevent damage caused by low oil levels, ensuring longevity and reducing maintenance concerns for users. Additionally, this generator includes a built-in fuel gauge, allowing users to monitor fuel levels with ease and helping to prevent unexpected shutdowns during operation.

Portability is another key characteristic of the Harbor Freight Tools 93507. It is designed with a compact and lightweight frame, making it easy to transport to job sites, camping trips, or any location where power is needed. The generator features a sturdy handle and flat-free tires, allowing for effortless maneuverability over various terrains.

The 93507 also comes equipped with multiple output options, including two 120V AC outlets and one 12V DC outlet. This variety allows users to connect a wide range of devices, from household appliances to outdoor equipment. The generator's surge protection feature ensures that sensitive electronics are safeguarded against power spikes, providing peace of mind for users.

In terms of fuel efficiency, the Harbor Freight Tools 93507 can run for up to 12 hours on a full tank, depending on the load. This impressive runtime means less frequent refueling, enhancing its usability during extended outdoor excursions or emergency situations.

Overall, the Harbor Freight Tools 93507 generator combines power, portability, and safety into a reliable tool for all your energy needs. With its durable design and advanced features, it stands out as an exceptional choice for anyone seeking a dependable portable power source.
Top Page Image Contents