Harbor Freight Tools 93507 Adjusting The Blade Tension, Adjusting The Feed Rate

Page 19

WHEEL

 

BLADE TENSION KNOB

(175)

 

(181)

 

 

BLADE

UPPER

 

 

 

 

SCREW (168)

 

 

BACK

 

 

 

 

 

COVER

 

 

 

(128)

 

 

 

 

ADJUSTING

 

 

 

SCREW

 

 

 

(168)

FIGURE R

Adjusting The Blade Tension:

1.Turn the Blade Tension Knob (181) clockwise to increase tension on the Saw Blade (127). Turn the Blade Tension Knob counterclockwise to decrease tension on the Saw Blade. Correct tension is acquired when the Saw Blade is just tight enough so that no slippage occurs between the Saw Blade and the Wheels (124, 175).

2.NOTE: When the Bandsaw is not in use over long periods of time, release the ten- sion on the Saw Blade (127).

Adjusting The Feed Rate:

1.Excessive feed pressure can break the Saw Blade (127). Insufficient feed pressure dulls the Saw Blade rapidly.

2.The Cylinder (20) controls the blade speed during horizontal cutting. The hydraulic feed control is turned on or off via the small lever on the small cylinder. The speed is controlled during or right before horizontal cutting.

IMPORTANT: When the cylinder is in the OFF position, the Saw Arm will lock into the vertical position. Never force the Saw Arm down. If the Saw Arm descends while the Cylinder is in the OFF position, disconnect the unit from power and do not use the tool until the hydraulic feed has been repaired.

3.The Spring (87) may also need to be adjusted to ensure a proper feed rate. Loosen the Nut (91) on the right one turn. Loosen the nut on the left one turn to decrease the feed rate or tighten the Nut on the left one turn to increase feed rate. After adjusting, tighten the Nut on the right securely while holding the left nut still. (See

Figure S.)

SPRING

NUT (91)

ADJUSTING

ROD

 

(88)

NUT (91)

 

FIGURE S

SKU 93507

For technical questions, please call 1-800-444-3353.

Page 19

Page 18 Page 20
Image 19
Page 18 Page 20
Contents For technical questions, please call Metal Cutting BandsawContents Work Area Product SpecificationsGeneral Safety Rules Save this ManualPersonal Safety Electrical SafetyTool USE and Care ServiceSpecific Safety Rules Page Grounded Tools Tools With Three Prong Plugs GroundingSee Figure C Double Insulated Tools Tools With Two Prong PlugsExtension Cords See Figure C, next120 or 240 Volt SymbologyNameplate Extension Cord Length FeetUnpacking Assembly InstructionsAttach The Wheels Attach The Pulley Cover Remove The Shipping BoltSee Figure F Attach The Tool Stop Rod And Block Install The Coolant TankSee Figure H Figure J Wiring InstructionsOperating Instructions Using The Quick ViseSelecting Proper Blade Speeds Adjusting The Stop Block Adjusting The Quick Vise For An Angle CutConverting The Bandsaw For Vertical Use Adjusting The Blade Guide BearingsSee Figure R SKU For technical questions, please call Adjusting The Blade TrackingSee Figure R, next See Figure RAdjusting The Feed Rate Adjusting The Blade TensionSee Figure U, next Adjusting The Blade Guide BracketsBasic Bandsaw Operation -- Vertical Position See Figure TFigure U See Figure UBasic Bandsaw Operation -- Horizontal Position See Figure Do not use damaged equipment INSPECTION, MAINTENANCE, and CleaningFigure W See Figure WRemove the old V-Belt 183 from the two Pulleys 184 Figure Y See Figure Z, next SKU For technical questions, please callSee Figure Z Please Read the Following CarefullyProblem Possible Causes Possible Solution TroubleshootingPart Description Qty Parts ListREV 10/06 Assembly Diagram Assembly Diagram Warranty Limited 90 day/1 Year warranty

93507 specifications

Harbor Freight Tools 93507 is a powerful portable generator designed for convenience and reliability during power outages or outdoor activities. This generator is an ideal choice for homeowners, campers, and DIY enthusiasts, providing an efficient power solution in various situations.

The Harbor Freight Tools 93507 boasts a robust 4000 running watts and 5000 starting watts, ensuring a steady power supply for critical appliances and tools. Equipped with a reliable 7 HP, 196cc OHV engine, this generator delivers efficient performance while maintaining a relatively low noise level, making it suitable for both residential and recreational use.

One of the most notable features of the 93507 is its low oil shutdown system. This technology automatically turns off the engine to prevent damage caused by low oil levels, ensuring longevity and reducing maintenance concerns for users. Additionally, this generator includes a built-in fuel gauge, allowing users to monitor fuel levels with ease and helping to prevent unexpected shutdowns during operation.

Portability is another key characteristic of the Harbor Freight Tools 93507. It is designed with a compact and lightweight frame, making it easy to transport to job sites, camping trips, or any location where power is needed. The generator features a sturdy handle and flat-free tires, allowing for effortless maneuverability over various terrains.

The 93507 also comes equipped with multiple output options, including two 120V AC outlets and one 12V DC outlet. This variety allows users to connect a wide range of devices, from household appliances to outdoor equipment. The generator's surge protection feature ensures that sensitive electronics are safeguarded against power spikes, providing peace of mind for users.

In terms of fuel efficiency, the Harbor Freight Tools 93507 can run for up to 12 hours on a full tank, depending on the load. This impressive runtime means less frequent refueling, enhancing its usability during extended outdoor excursions or emergency situations.

Overall, the Harbor Freight Tools 93507 generator combines power, portability, and safety into a reliable tool for all your energy needs. With its durable design and advanced features, it stands out as an exceptional choice for anyone seeking a dependable portable power source.
Top Page Image Contents