Harbor Freight Tools 93507 specification

10.When cutting a large workpiece, make sure its entire length is properly support- ed. If necessary, use a roller stand (not included) with a larger workpiece.

11.Allow the Saw Blade (127) to turn up to full speed before feeding the workpiece into the Saw Blade. (See Figure U.)

12.WARNING! Always keep hands and fingers safely away from the cutting area.

13.Feed the workpiece into the Saw Blade (127) gradually. Do not force the Band- saw to remove material faster than it is designed to cut. (See Figure U.)

14.Never attempt to remove material stuck in the moving parts of the Bandsaw while it is plugged in and running. Turn off the Bandsaw if the workpiece is to be backed out of an uncompleted cut.

15.Once the cut is made, turn the Motor Toggle Switch (37) to its “OFF” position. Turn the Coolant Pump Toggle Switch (11) to its “OFF” position. Turn the Cool- ant Pump Valve (159) to its “CLOSED” position. Then, unplug the Power Cord Plug (38) from its electrical outlet. (See Figure U.)

16.Wait until the Saw Blade (127) comes to a complete stop. Then, remove the workpiece and scrap material from the Large Vertical Cutting Plate (182).

(See Figure U.)

17.Turn the Hydraulic Cylinder (20) to its “ON” position. Adjust the feed rate if needed (by turning the knob on the Cylinder counterclockwise), and slowly allow the Saw Head to lower to its horizontal position. (See Figure U.)

Basic Bandsaw Operation -- Horizontal Position:

1.WARNING! Always wear ANSI approved safety impact eye goggles when operating the Bandsaw.

2.Do not plug the Power Cord Plug (38) into an electrical outlet until all nec- essary adjustments (as previously discussed in this manual) have been made. Be sure that the Bandsaw is set up with it’s Small Vertical Cutting Plate (142) before proceeding - see page 17.

3.Turn the Hydraulic Cylinder (20) to its “ON” position, and raise the Saw Head to its full vertical position. Then, turn the Hydraulic Cylinder (20) to its “OFF” posi- tion to lock the Saw Head in place. (See Figure U.)

4.Secure the workpiece in the Vise assembly (94, 95). When cutting a large work- piece, make sure its entire length is properly supported. If necessary, use a roller stand (not included) with a larger workpiece. (See Figure V.)

5.If cutting several workpieces at the same length, you may wish to adjust the Stop Block (73) to the desired position. (See Figure V.)

REV 10/06

SKU 93507

For technical questions, please call 1-800-444-3353.

Page 22

93507 specifications

Harbor Freight Tools 93507 is a powerful portable generator designed for convenience and reliability during power outages or outdoor activities. This generator is an ideal choice for homeowners, campers, and DIY enthusiasts, providing an efficient power solution in various situations.

The Harbor Freight Tools 93507 boasts a robust 4000 running watts and 5000 starting watts, ensuring a steady power supply for critical appliances and tools. Equipped with a reliable 7 HP, 196cc OHV engine, this generator delivers efficient performance while maintaining a relatively low noise level, making it suitable for both residential and recreational use.

One of the most notable features of the 93507 is its low oil shutdown system. This technology automatically turns off the engine to prevent damage caused by low oil levels, ensuring longevity and reducing maintenance concerns for users. Additionally, this generator includes a built-in fuel gauge, allowing users to monitor fuel levels with ease and helping to prevent unexpected shutdowns during operation.

Portability is another key characteristic of the Harbor Freight Tools 93507. It is designed with a compact and lightweight frame, making it easy to transport to job sites, camping trips, or any location where power is needed. The generator features a sturdy handle and flat-free tires, allowing for effortless maneuverability over various terrains.

The 93507 also comes equipped with multiple output options, including two 120V AC outlets and one 12V DC outlet. This variety allows users to connect a wide range of devices, from household appliances to outdoor equipment. The generator's surge protection feature ensures that sensitive electronics are safeguarded against power spikes, providing peace of mind for users.

In terms of fuel efficiency, the Harbor Freight Tools 93507 can run for up to 12 hours on a full tank, depending on the load. This impressive runtime means less frequent refueling, enhancing its usability during extended outdoor excursions or emergency situations.

Overall, the Harbor Freight Tools 93507 generator combines power, portability, and safety into a reliable tool for all your energy needs. With its durable design and advanced features, it stands out as an exceptional choice for anyone seeking a dependable portable power source.