Harbor Freight Tools 93507 operating instructions Tool USE and Care, Service

Page 5

4.Remove adjusting keys or wrenches before turning the power tool on. A wrench or a key that is left attached to a rotating part of the power tool may result in personal injury.

5.Do not overreach. Keep proper footing and balance at all times. Proper footing and balance enables better control of the power tool in unexpected situations.

6.Use safety equipment. Always wear eye protection. Dust mask, nonskid safety shoes, hard hat, or hearing protection must be used for appropriate conditions.

TOOL USE AND CARE

1.Use clamps (not included) or other practical ways to secure and support the workpiece to a stable platform. Holding the work by hand or against your body is unstable and may lead to loss of control.

2.Do not force the tool. Use the correct tool for your application. The correct tool will do the job better and safer at the rate for which it is designed.

3.Do not use the power tool if the Power Switch does not turn it on or off. Any tool that cannot be controlled with the Power Switch is dangerous and must be replaced.

4.Disconnect the Power Cord Plug from the power source before making any adjustments, changing accessories, or storing the tool. Such preventive safety measures reduce the risk of starting the tool accidentally.

5.Store idle tools out of reach of children and other untrained persons. Tools are dangerous in the hands of untrained users.

6.Maintain tools with care. Keep cutting tools sharp and clean. Properly main- tained tools with a sharp cutting edge are less likely to bind and are easier to control. Do not use a damaged tool. Tag damaged tools “Do not use” until repaired.

7.Check for misalignment or binding of moving parts, breakage of parts, and any other condition that may affect the tool’s operation. If damaged, have the tool serviced before using. Many accidents are caused by poorly maintained tools.

8.Use only accessories that are recommended by the manufacturer for your model. Accessories that may be suitable for one tool may become hazardous when used on another tool.

SERVICE

1.Tool service must be performed only by qualified repair personnel. Service or maintenance performed by unqualified personnel could result in a risk of injury.

2.When servicing a tool, use only identical replacement parts. Follow instruc- tions in the “Inspection, Maintenance, And Cleaning” section of this manual.

SKU 93507

For technical questions, please call 1-800-444-3353.

Page

Image 5
Contents For technical questions, please call Metal Cutting BandsawContents General Safety Rules Product SpecificationsSave this Manual Work AreaPersonal Safety Electrical SafetyTool USE and Care ServiceSpecific Safety Rules Page Grounded Tools Tools With Three Prong Plugs GroundingExtension Cords Double Insulated Tools Tools With Two Prong PlugsSee Figure C, next See Figure CNameplate Extension Cord Length SymbologyFeet 120 or 240 VoltAttach The Wheels Assembly InstructionsUnpacking See Figure F Remove The Shipping BoltAttach The Pulley Cover See Figure H Install The Coolant TankAttach The Tool Stop Rod And Block Figure J Wiring InstructionsSelecting Proper Blade Speeds Using The Quick ViseOperating Instructions Adjusting The Stop Block Adjusting The Quick Vise For An Angle CutConverting The Bandsaw For Vertical Use Adjusting The Blade Guide BearingsSee Figure R, next Adjusting The Blade TrackingSee Figure R See Figure R SKU For technical questions, please callAdjusting The Feed Rate Adjusting The Blade TensionBasic Bandsaw Operation -- Vertical Position Adjusting The Blade Guide BracketsSee Figure T See Figure U, nextFigure U See Figure UBasic Bandsaw Operation -- Horizontal Position See Figure Do not use damaged equipment INSPECTION, MAINTENANCE, and CleaningFigure W See Figure WRemove the old V-Belt 183 from the two Pulleys 184 Figure Y See Figure Z, next SKU For technical questions, please callSee Figure Z Please Read the Following CarefullyProblem Possible Causes Possible Solution TroubleshootingPart Description Qty Parts ListREV 10/06 Assembly Diagram Assembly Diagram Warranty Limited 90 day/1 Year warranty

93507 specifications

Harbor Freight Tools 93507 is a powerful portable generator designed for convenience and reliability during power outages or outdoor activities. This generator is an ideal choice for homeowners, campers, and DIY enthusiasts, providing an efficient power solution in various situations.

The Harbor Freight Tools 93507 boasts a robust 4000 running watts and 5000 starting watts, ensuring a steady power supply for critical appliances and tools. Equipped with a reliable 7 HP, 196cc OHV engine, this generator delivers efficient performance while maintaining a relatively low noise level, making it suitable for both residential and recreational use.

One of the most notable features of the 93507 is its low oil shutdown system. This technology automatically turns off the engine to prevent damage caused by low oil levels, ensuring longevity and reducing maintenance concerns for users. Additionally, this generator includes a built-in fuel gauge, allowing users to monitor fuel levels with ease and helping to prevent unexpected shutdowns during operation.

Portability is another key characteristic of the Harbor Freight Tools 93507. It is designed with a compact and lightweight frame, making it easy to transport to job sites, camping trips, or any location where power is needed. The generator features a sturdy handle and flat-free tires, allowing for effortless maneuverability over various terrains.

The 93507 also comes equipped with multiple output options, including two 120V AC outlets and one 12V DC outlet. This variety allows users to connect a wide range of devices, from household appliances to outdoor equipment. The generator's surge protection feature ensures that sensitive electronics are safeguarded against power spikes, providing peace of mind for users.

In terms of fuel efficiency, the Harbor Freight Tools 93507 can run for up to 12 hours on a full tank, depending on the load. This impressive runtime means less frequent refueling, enhancing its usability during extended outdoor excursions or emergency situations.

Overall, the Harbor Freight Tools 93507 generator combines power, portability, and safety into a reliable tool for all your energy needs. With its durable design and advanced features, it stands out as an exceptional choice for anyone seeking a dependable portable power source.