Fujitsu 8000 SERIES Busy lamp, Headphone volume only for music CDs, Floppy disk access lamp

Page 13

1Busy lamp

This lamp lights up while data is read from a CD-ROM or music CD is played.

2Headphone volume (only for music CDs)

Use this control to adjust the volume of headphones.

3Headphone jack (only for music CDs)

When listening to a music CD with a headphone, plug it to this jack.

4Floppy disk access lamp

This lamp lights up while the floppy disk is accessed.

5Ventholes (on the side panel and the bottom of the front panel) These ventholes take air in for cooling inside.

6Front access bay

Connect optional devices, such as an internal hard disk and a magneto-optical disk drive).

7CD-ROM drive

Insert a CD-ROM into this drive to read data or programs, or insert a music CD for playback.

8Hard disk access lamp

This lamp lights up while the hard disk is accessed.

9Power lamp

This lamp lights up in green when the PC is on.

This lamp lights up in orange in the standby (power-saving) mode.

10Power switch

Press this switch to turn on the PC or set the system to the standby (power-saving) mode.

11Reset switch

Press this switch to delete data from the memory to re-load programs including OS.

12Eject button

Press this button to insert or remove a CD-ROM.

13Floppy disk eject button

Press this button to remove a floppy disk from the floppy disk drive. Do not press this button when the floppy disk access lamp is on.

14Floppy disk drive

Writes data to or read data from a floppy disk.

15USB connector

Connect a USB peripheral device.

3

Image 13

Contents

Declaration of Conformity Deskpower 8000 Series User’s ManualImportant Safety Instructions Page Greetings Conventions used in this manual Command entriesRepresenting keys and use thereof Representing buttonsConventions used in the text of the manual Point HelpScreen display examples IllustrationsFujitsu Limited Introduction Manual configuration Contents Installing an Internal Hard Disk Installing Expansion CardsInstalling Other Devices ProblemsIntroduction Front of the PC unit Part Names and FunctionsFloppy disk access lamp Headphone volume only for music CDsHard disk access lamp Power lampBack of the PC unit CRT connector LAN connector Connect a LAN cable Line OUT terminalInlet OutletInside the PC unit Power supply unit Internal hard disk bayDisplay card Expansion card slots Motherboard Point KeyboardCtrl control key Caps Lock/Alphanumeric keyWindows key Alt keyUsing the mouse buttons Using the mouseMouse Moving the mousePointing Double-clickingDragging ScrollingInstallation area InstallationExample of installation Connection Connect the power cable to the display Connect the power cable to the outletConnect the keyboard Connect the display cable to the PC unit Connect the mouseConnect the LAN cable Connecting the power cable Page Turning on the power Turning On the PowerPress the power switch on the PC Turning off the power Turning Off the PowerFor Windows Me or 98 model For Windows NT modelResetting the PC ResettingHard resetting CDs Inserting a CD Inserting or Removing CDRemoving the CD Press the eject buttonInserting or removing a floppy disk Point Floppy DiskInserting a floppy disk Removing the floppy disk Confirm that the floppy disk access lamp is offHardware What are peripheral devices? Before Installing a Peripheral DevicePage Location for installation File bay options On standard models Master and slaveSlave Master Removing the side and upper covers, and front panel Removing the CoverRemove the bracket Remove the side coverPage Tilt the front panel toward you before pulling it up Increasing the Memory Capacity Applicable memory modules Location of memory modulesMemory module combinations Installing/removing memory modules Remove the bracke Installing memory modulesReinstall the bracket Reinstall the side cover Reinstall the ductRemoving memory modules Insert a memory module into the slotInstalling Expansion Cards Applicable expansion cards Installing an expansion cardFix the expansion card with the one screw removed in Step Reinstall the bracket Installing a disk in the internal hard disk bay Installing an Internal Hard DiskSet the jumper switch Attach the brackets to the PC unit Replace or install the internal hard diskConnect flat cables Connect the power cableInstalling a disk in the front access bay Installing front access bay options Installing Other DevicesInstall a front access bay option on the PC unit CD-ROM Reinstall the front panel and upper and side covers Set the installed hard disks using Bios Setup Page Troubleshooting Problems Data cannot be read from the CD-ROM drive Characters entered using the keyboard are not displayedMouse cursor does not move Network connection cannot be establishedPage Technical Information Maintenance of the keyboard Maintenance of the HardwareMaintenance of CDs Remove the ball and clean with water Maintenance of the mouseClean inside the mouse Remove the mouse bottom coverCleaning of the floppy disk drive Precautions on television/radio Precautions on PCPreventing Television or Radio Interference Engage a lock you prepared with the mounting bracket Security of the CaseSpecifications of PC unit Hardware SpecificationsProduct name Point Sound specifications LAN adapter specificationsGraphical specifications LAN controller IntelCRT connector Connector specificationsLAN connector 100BASE-TX/10BASE-T Pin No Signal name DescriptionSerial connector Parallel connectorKeyboard connector Mouse connectorUSB connector Power-saving function Windows 2000 models Other PrecautionsWhen using USB devices DisposalReplacement of display Precautions on using displayUSB hub Windows 2000 models Addition of LAN adapterAcpi standby mode Windows 2000 models Index Parallel connector