Fujitsu 8000 SERIES user manual Important Safety Instructions

Page 2

IMPORTANT SAFETY INSTRUCTIONS

1.Read these instructions carefully. Save these instructions for future reference.

2.Follow all warnings and instructions marked on the product.

3.Unplug this product from the wall outlet before cleaning. Do not use liquid cleaners or aerosol cleaners. Use a damp cloth for cleaning.

4.Do not use this product near water.

5.Do not place this product on an unstable cart, stand, or table. The product may fall, causing serious damage to the product.

6.Slots and openings in the cabinet and the back or bottom are provided for ventilation; to ensure reliable operation of the product and to protect it from overheating, these openings must not be blocked or covered. The openings should never be blocked by placing the product on a bed, sofa, rug, or other similar surface. This product should never be placed near or over a radiator or heat register, or in a built-in installation unless proper ventilation is provided.

7.This product should be operated from the type of power indicated on the marking label. If you are not sure of the type of power available, consult your dealer or local power company.

8.This product is equipped with a 3-wire grounding-type plug, a plug having a third (grounding) pin. This will only plug into a grounding-type power outlet. This is a safety feature. If you are unable to insert the plug into the outlet, contact your electrician to replace your obsolete outlet. Do not defeat the purpose of the grounding-type plug.

9.Do not allow anything to rest on the power cord. Do not locate this product where persons will walk on the cord.

10.If an extension cord is used with this product, make sure that the total ampere rating of the equipment plugged into the extension cord does not exceed the extension cord ampere rating. Also, make sure that the total rating of all products plugged into the wall outlet does not exceed 15 amperes.

11.Never push objects of any kind into this product through cabinet slots as they may touch dangerous voltage points that could result in a fire or electric shock. Never spill liquid of any kind on the product.

12.Do not attempt to service this product yourself, as opening or removing covers may expose you to dangerous voltage points or other risks. Refer all servicing to qualified service personnel.

Page 1 Page 3
Image 2
Page 1 Page 3
Contents Deskpower 8000 Series User’s Manual Declaration of ConformityImportant Safety Instructions Page Greetings Representing keys and use thereof Command entriesConventions used in this manual Representing buttonsScreen display examples Point HelpConventions used in the text of the manual IllustrationsFujitsu Limited Manual configuration IntroductionContents Installing Other Devices Installing Expansion CardsInstalling an Internal Hard Disk ProblemsIntroduction Part Names and Functions Front of the PC unitHard disk access lamp Headphone volume only for music CDsFloppy disk access lamp Power lampBack of the PC unit Inlet LAN connector Connect a LAN cable Line OUT terminalCRT connector OutletDisplay card Expansion card slots Power supply unit Internal hard disk bayInside the PC unit Motherboard Keyboard PointWindows key Caps Lock/Alphanumeric keyCtrl control key Alt keyMouse Using the mouseUsing the mouse buttons Moving the mouseDragging Double-clickingPointing ScrollingExample of installation InstallationInstallation area Connection Connect the keyboard Connect the power cable to the outletConnect the power cable to the display Connect the LAN cable Connect the mouseConnect the display cable to the PC unit Connecting the power cable Page Turning On the Power Turning on the powerPress the power switch on the PC For Windows Me or 98 model Turning Off the PowerTurning off the power For Windows NT modelResetting Resetting the PCHard resetting CDs Removing the CD Inserting or Removing CDInserting a CD Press the eject buttonInserting a floppy disk Floppy DiskInserting or removing a floppy disk Point Confirm that the floppy disk access lamp is off Removing the floppy diskHardware Before Installing a Peripheral Device What are peripheral devices?Page Location for installation File bay options Master and slave On standard modelsSlave Master Removing the Cover Removing the side and upper covers, and front panelRemove the side cover Remove the bracketPage Tilt the front panel toward you before pulling it up Increasing the Memory Capacity Memory module combinations Location of memory modulesApplicable memory modules Installing/removing memory modules Installing memory modules Remove the brackeRemoving memory modules Reinstall the ductReinstall the bracket Reinstall the side cover Insert a memory module into the slotInstalling Expansion Cards Installing an expansion card Applicable expansion cardsFix the expansion card with the one screw removed in Step Reinstall the bracket Set the jumper switch Installing an Internal Hard DiskInstalling a disk in the internal hard disk bay Replace or install the internal hard disk Attach the brackets to the PC unitConnect the power cable Connect flat cablesInstalling a disk in the front access bay Installing Other Devices Installing front access bay optionsInstall a front access bay option on the PC unit CD-ROM Reinstall the front panel and upper and side covers Set the installed hard disks using Bios Setup Page Troubleshooting Problems Mouse cursor does not move Characters entered using the keyboard are not displayedData cannot be read from the CD-ROM drive Network connection cannot be establishedPage Technical Information Maintenance of CDs Maintenance of the HardwareMaintenance of the keyboard Clean inside the mouse Maintenance of the mouseRemove the ball and clean with water Remove the mouse bottom coverCleaning of the floppy disk drive Preventing Television or Radio Interference Precautions on PCPrecautions on television/radio Security of the Case Engage a lock you prepared with the mounting bracketProduct name Hardware SpecificationsSpecifications of PC unit Point Graphical specifications LAN adapter specificationsSound specifications LAN controller IntelLAN connector 100BASE-TX/10BASE-T Connector specificationsCRT connector Pin No Signal name DescriptionParallel connector Serial connectorUSB connector Mouse connectorKeyboard connector When using USB devices Other PrecautionsPower-saving function Windows 2000 models DisposalUSB hub Windows 2000 models Precautions on using displayReplacement of display Addition of LAN adapterAcpi standby mode Windows 2000 models Index Parallel connector

8000 SERIES specifications

The Fujitsu 8000 Series is a cutting-edge family of mainframe computers that exemplify the convergence of robust performance, advanced technologies, and unparalleled reliability. Designed to address the needs of modern enterprises, this series is particularly noted for its capabilities in supporting mission-critical applications, large-scale transactions, and data-intensive workloads.

At the heart of the Fujitsu 8000 Series lies the SPARC architecture, which enables exceptional processing power and efficiency. The architecture supports high levels of parallel processing, allowing multiple tasks to be executed simultaneously, thereby maximizing throughput and minimizing latency. This capability is crucial for organizations that require rapid and reliable data processing to keep pace with their operational demands.

One of the standout features of the 8000 Series is its advanced virtualization capabilities. This allows businesses to run multiple virtual machines on a single physical unit, optimizing resource utilization while reducing operational costs. The series also integrates robust security features, including hardware-level encryption and advanced access controls, ensuring that sensitive data and applications remain protected from evolving cyber threats.

The Fujitsu 8000 Series is built with energy efficiency in mind. Utilizing innovative cooling technologies and power management solutions, these systems achieve significant energy savings without compromising performance. This sustainability aspect is increasingly important for organizations looking to reduce their carbon footprint and operational expenditures.

Scalability is another hallmark of the Fujitsu 8000 Series. Organizations can easily expand their systems by adding additional processors, storage, and memory, providing the flexibility to grow alongside their changing business needs. This scalability is paired with a comprehensive suite of management tools that assist IT teams in monitoring system performance and health, streamlining maintenance, and reducing downtime.

Additionally, the Fujitsu 8000 Series supports a wide range of operating systems and enterprise applications, making it a versatile solution for businesses across various industries. Its compatibility with cloud services also facilitates hybrid IT environments, allowing organizations to leverage both on-premises and cloud resources efficiently.

In summary, the Fujitsu 8000 Series stands out for its exceptional processing power, advanced virtualization, energy efficiency, scalability, and robust security features. These characteristics make it a valuable asset for enterprises seeking to enhance their IT infrastructure and meet the demands of an increasingly complex digital landscape. With the Fujitsu 8000 Series, organizations can drive innovation, improve operational efficiency, and maintain a competitive edge in their respective markets.
Top Page Image Contents