Fujitsu 8000 SERIES user manual CDs

Page 33

9 CDs

This section explains how to handle, insert, and remove CDs.

■Notes on handling

To prevent faults, note the following when handling CDs.

●Notes on handling CDs

•Do not use a ball-point pen or pencil on the label (printed side). Do not affix a label.

•Do not touch or damage the data side.

•Do not bend or compress them.

•If the CD gets dirty or wet, wipe it with a dry soft cloth from the center to the edge. Do not use a cleaner.

•Keep them dry.

•Do not place them in an extreme temperature environment.

•Do not place them in a humid and dusty environment.

●Notes on using the drive

•Do not use CDs that do not meet the requirements in “Notes on handling CDs,” or those warped, damaged, or cracked. Otherwise, a fault may occur. Faults caused by the use of a defective CD shall not be covered by the warranty.

•This PC can use circular CDs only. Do not use odd-shaped CDs. Otherwise, a fault may occur. Faults caused by the use of an odd-shaped CD shall not be covered by the warranty.

•Use of a commercially available CD-ROM cleaning disc may place dust on the lens. Do not use a CD-ROM cleaning disk.

￿Point

•CD-ROM is a compact disc (CD) that stores PC information (such as characters) rather than music. ROM stands for Read Only Memory. This PC can read data from CD-ROMs but cannot write data, except when CD-R/RW is selected as a custom-made option.

•This PC can use CDs having any of the following marks. Do not use CDs without a mark. Otherwise, a fault may occur.

An additional application may be necessary to use particular types of CDs.

* ASTERISKED CDS CAN ONLY BE USED ON CD-R/RW DRIVES TO WRITE DATA.

23

Page 32 Page 34
Image 33
Page 32 Page 34
Contents Declaration of Conformity Deskpower 8000 Series User’s ManualImportant Safety Instructions Page Greetings Conventions used in this manual Command entriesRepresenting keys and use thereof Representing buttonsConventions used in the text of the manual Point HelpScreen display examples IllustrationsFujitsu Limited Introduction Manual configurationContents Installing an Internal Hard Disk Installing Expansion CardsInstalling Other Devices ProblemsIntroduction Front of the PC unit Part Names and FunctionsFloppy disk access lamp Headphone volume only for music CDsHard disk access lamp Power lampBack of the PC unit CRT connector LAN connector Connect a LAN cable Line OUT terminalInlet OutletPower supply unit Internal hard disk bay Inside the PC unitDisplay card Expansion card slots Motherboard Point KeyboardCtrl control key Caps Lock/Alphanumeric keyWindows key Alt keyUsing the mouse buttons Using the mouseMouse Moving the mousePointing Double-clickingDragging ScrollingInstallation Installation areaExample of installation Connection Connect the power cable to the outlet Connect the power cable to the displayConnect the keyboard Connect the mouse Connect the display cable to the PC unitConnect the LAN cable Connecting the power cable Page Turning on the power Turning On the PowerPress the power switch on the PC Turning off the power Turning Off the PowerFor Windows Me or 98 model For Windows NT modelResetting the PC ResettingHard resetting CDs Inserting a CD Inserting or Removing CDRemoving the CD Press the eject buttonFloppy Disk Inserting or removing a floppy disk PointInserting a floppy disk Removing the floppy disk Confirm that the floppy disk access lamp is offHardware What are peripheral devices? Before Installing a Peripheral DevicePage Location for installation File bay options On standard models Master and slaveSlave Master Removing the side and upper covers, and front panel Removing the CoverRemove the bracket Remove the side coverPage Tilt the front panel toward you before pulling it up Increasing the Memory Capacity Location of memory modules Applicable memory modulesMemory module combinations Installing/removing memory modules Remove the bracke Installing memory modulesReinstall the bracket Reinstall the side cover Reinstall the ductRemoving memory modules Insert a memory module into the slotInstalling Expansion Cards Applicable expansion cards Installing an expansion cardFix the expansion card with the one screw removed in Step Reinstall the bracket Installing an Internal Hard Disk Installing a disk in the internal hard disk baySet the jumper switch Attach the brackets to the PC unit Replace or install the internal hard diskConnect flat cables Connect the power cableInstalling a disk in the front access bay Installing front access bay options Installing Other DevicesInstall a front access bay option on the PC unit CD-ROM Reinstall the front panel and upper and side covers Set the installed hard disks using Bios Setup Page Troubleshooting Problems Data cannot be read from the CD-ROM drive Characters entered using the keyboard are not displayedMouse cursor does not move Network connection cannot be establishedPage Technical Information Maintenance of the Hardware Maintenance of the keyboardMaintenance of CDs Remove the ball and clean with water Maintenance of the mouseClean inside the mouse Remove the mouse bottom coverCleaning of the floppy disk drive Precautions on PC Precautions on television/radioPreventing Television or Radio Interference Engage a lock you prepared with the mounting bracket Security of the CaseHardware Specifications Specifications of PC unitProduct name Point Sound specifications LAN adapter specificationsGraphical specifications LAN controller IntelCRT connector Connector specificationsLAN connector 100BASE-TX/10BASE-T Pin No Signal name DescriptionSerial connector Parallel connectorMouse connector Keyboard connectorUSB connector Power-saving function Windows 2000 models Other PrecautionsWhen using USB devices DisposalReplacement of display Precautions on using displayUSB hub Windows 2000 models Addition of LAN adapterAcpi standby mode Windows 2000 models Index Parallel connector

8000 SERIES specifications

The Fujitsu 8000 Series is a cutting-edge family of mainframe computers that exemplify the convergence of robust performance, advanced technologies, and unparalleled reliability. Designed to address the needs of modern enterprises, this series is particularly noted for its capabilities in supporting mission-critical applications, large-scale transactions, and data-intensive workloads.

At the heart of the Fujitsu 8000 Series lies the SPARC architecture, which enables exceptional processing power and efficiency. The architecture supports high levels of parallel processing, allowing multiple tasks to be executed simultaneously, thereby maximizing throughput and minimizing latency. This capability is crucial for organizations that require rapid and reliable data processing to keep pace with their operational demands.

One of the standout features of the 8000 Series is its advanced virtualization capabilities. This allows businesses to run multiple virtual machines on a single physical unit, optimizing resource utilization while reducing operational costs. The series also integrates robust security features, including hardware-level encryption and advanced access controls, ensuring that sensitive data and applications remain protected from evolving cyber threats.

The Fujitsu 8000 Series is built with energy efficiency in mind. Utilizing innovative cooling technologies and power management solutions, these systems achieve significant energy savings without compromising performance. This sustainability aspect is increasingly important for organizations looking to reduce their carbon footprint and operational expenditures.

Scalability is another hallmark of the Fujitsu 8000 Series. Organizations can easily expand their systems by adding additional processors, storage, and memory, providing the flexibility to grow alongside their changing business needs. This scalability is paired with a comprehensive suite of management tools that assist IT teams in monitoring system performance and health, streamlining maintenance, and reducing downtime.

Additionally, the Fujitsu 8000 Series supports a wide range of operating systems and enterprise applications, making it a versatile solution for businesses across various industries. Its compatibility with cloud services also facilitates hybrid IT environments, allowing organizations to leverage both on-premises and cloud resources efficiently.

In summary, the Fujitsu 8000 Series stands out for its exceptional processing power, advanced virtualization, energy efficiency, scalability, and robust security features. These characteristics make it a valuable asset for enterprises seeking to enhance their IT infrastructure and meet the demands of an increasingly complex digital landscape. With the Fujitsu 8000 Series, organizations can drive innovation, improve operational efficiency, and maintain a competitive edge in their respective markets.
Top Page Image Contents