Fujitsu 8000 SERIES user manual Installation area, Example of installation

Page 22

4 Installation

This section explains how to install your PC and also provides note on using the PC.

■Installation area

Do not install your PC in the following areas.

•Areas that are humid, dusty, or subjected to oil mist.

•Poorly ventilated areas

•Areas where fire is used

•Bathrooms and other areas where water may splash

•Areas exposed to direct sunlight or near a heater and other areas with high temperatures

•Areas with temperatures below 10°C

•Areas where you may trip on a cable.

•Areas subjected to a strong magnetic field, such as near a television or speaker.

•Unstable areas with violent vibration or on a slanted surface

■Example of installation

Install your PC as shown in the figures below.

CRT display

PC unit

Keyboard

Mouse

Point

•When installing your PC, be sure not to block the ventholes on the sides, bottom, and back of the PC unit.

12

Image 22

Contents

Deskpower 8000 Series User’s Manual Declaration of ConformityImportant Safety Instructions Page Greetings Representing keys and use thereof Command entriesConventions used in this manual Representing buttonsScreen display examples Point HelpConventions used in the text of the manual IllustrationsFujitsu Limited Manual configuration IntroductionContents Installing Other Devices Installing Expansion CardsInstalling an Internal Hard Disk ProblemsIntroduction Part Names and Functions Front of the PC unitHard disk access lamp Headphone volume only for music CDsFloppy disk access lamp Power lampBack of the PC unit Inlet LAN connector Connect a LAN cable Line OUT terminalCRT connector OutletInside the PC unit Power supply unit Internal hard disk bayDisplay card Expansion card slots Motherboard Keyboard PointWindows key Caps Lock/Alphanumeric keyCtrl control key Alt keyMouse Using the mouseUsing the mouse buttons Moving the mouseDragging Double-clickingPointing ScrollingInstallation area InstallationExample of installation Connection Connect the power cable to the display Connect the power cable to the outletConnect the keyboard Connect the display cable to the PC unit Connect the mouseConnect the LAN cable Connecting the power cable Page Turning On the Power Turning on the powerPress the power switch on the PC For Windows Me or 98 model Turning Off the PowerTurning off the power For Windows NT modelResetting Resetting the PCHard resetting CDs Removing the CD Inserting or Removing CDInserting a CD Press the eject buttonInserting or removing a floppy disk Point Floppy DiskInserting a floppy disk Confirm that the floppy disk access lamp is off Removing the floppy diskHardware Before Installing a Peripheral Device What are peripheral devices?Page Location for installation File bay options Master and slave On standard modelsSlave Master Removing the Cover Removing the side and upper covers, and front panelRemove the side cover Remove the bracketPage Tilt the front panel toward you before pulling it up Increasing the Memory Capacity Applicable memory modules Location of memory modulesMemory module combinations Installing/removing memory modules Installing memory modules Remove the brackeRemoving memory modules Reinstall the ductReinstall the bracket Reinstall the side cover Insert a memory module into the slotInstalling Expansion Cards Installing an expansion card Applicable expansion cardsFix the expansion card with the one screw removed in Step Reinstall the bracket Installing a disk in the internal hard disk bay Installing an Internal Hard DiskSet the jumper switch Replace or install the internal hard disk Attach the brackets to the PC unitConnect the power cable Connect flat cablesInstalling a disk in the front access bay Installing Other Devices Installing front access bay optionsInstall a front access bay option on the PC unit CD-ROM Reinstall the front panel and upper and side covers Set the installed hard disks using Bios Setup Page Troubleshooting Problems Mouse cursor does not move Characters entered using the keyboard are not displayedData cannot be read from the CD-ROM drive Network connection cannot be establishedPage Technical Information Maintenance of the keyboard Maintenance of the HardwareMaintenance of CDs Clean inside the mouse Maintenance of the mouseRemove the ball and clean with water Remove the mouse bottom coverCleaning of the floppy disk drive Precautions on television/radio Precautions on PCPreventing Television or Radio Interference Security of the Case Engage a lock you prepared with the mounting bracketSpecifications of PC unit Hardware SpecificationsProduct name Point Graphical specifications LAN adapter specificationsSound specifications LAN controller IntelLAN connector 100BASE-TX/10BASE-T Connector specificationsCRT connector Pin No Signal name DescriptionParallel connector Serial connectorKeyboard connector Mouse connectorUSB connector When using USB devices Other PrecautionsPower-saving function Windows 2000 models DisposalUSB hub Windows 2000 models Precautions on using displayReplacement of display Addition of LAN adapterAcpi standby mode Windows 2000 models Index Parallel connector