Fujitsu 8000 SERIES user manual

Page 39

■Notes on handling

When installing a peripheral device, note the following.

•Whenever possible, use peripheral devices supplied by Fujitsu.

Malfunction or damage caused by the use of a third-party product instead of the Fujitsu device shall not be covered by the warranty.

•Before using a peripheral device in a category for which Fujitsu does not supply genuine products, contact the third-party manufacturer to ask whether the device is compatible with the PC.

•Have you finished Windows setup?

Installing a peripheral device on the PC before setup may cause the setup program to fail.

•Install one peripheral device at a time.

Installing more than one peripheral devices at a time may cause driver installation to fail.

•Turn off the PC and connected devices.

For safety, be sure to unplug the PC and connected devices. Even if the PC is turned off, an electric current flows in the PC unit.

•Do not start work immediately after turning off the power.

Components inside the PC may be still hot. After turning off the power and unplugging the PC, wait for about 10 minutes before starting work.

•Do not disassemble the power supply unit.

The power supply unit is a box-shaped component on the back inside the PC.

•Be careful with the cables and components inside. Do not damage or modify them.

•Be careful of static electricity.

PC boards and electronic parts of internal peripheral devices are exposed. They may be damaged by static electricity generated on your body. Before handling these parts, touch a large metallic object to discharge static electricity.

•Do not touch PC board surface, soldered parts or connectors. Hold PC boards by the brackets or edges.

•Power supply for peripheral devices

Typical peripheral devices should be turned on before turning on the PC, however, some should be turned on after the PC. See the manual for the peripheral device.

•Use ACPI-compatible devices (for Windows 2000).

Since the PC is controlled as per ACPI (one of the power supply control standards for power saving), peripheral devices must conform to the ACPI standard.

•The use of a peripheral device not conforming to the ACPI standard may cause malfunction of the PC or device. Contact the device manufacturer to ask if your device supports ACPI.

Use an appropriate screwdriver.

•You must use a Phillips screwdriver to remove slot covers and brackets from the PC. Use a screwdriver of an appropriate size not to damage screw heads.

29

Page 38 Page 40
Image 39
Page 38 Page 40
Contents Declaration of Conformity Deskpower 8000 Series User’s ManualImportant Safety Instructions Page Greetings Representing buttons Command entriesConventions used in this manual Representing keys and use thereofIllustrations Point HelpConventions used in the text of the manual Screen display examplesFujitsu Limited Introduction Manual configurationContents Problems Installing Expansion CardsInstalling an Internal Hard Disk Installing Other DevicesIntroduction Front of the PC unit Part Names and FunctionsPower lamp Headphone volume only for music CDsFloppy disk access lamp Hard disk access lampBack of the PC unit Outlet LAN connector Connect a LAN cable Line OUT terminalCRT connector InletPower supply unit Internal hard disk bay Inside the PC unitDisplay card Expansion card slots Motherboard Point KeyboardAlt key Caps Lock/Alphanumeric keyCtrl control key Windows keyMoving the mouse Using the mouseUsing the mouse buttons MouseScrolling Double-clickingPointing DraggingInstallation Installation areaExample of installation Connection Connect the power cable to the outlet Connect the power cable to the displayConnect the keyboard Connect the mouse Connect the display cable to the PC unitConnect the LAN cable Connecting the power cable Page Turning on the power Turning On the PowerPress the power switch on the PC For Windows NT model Turning Off the PowerTurning off the power For Windows Me or 98 modelResetting the PC ResettingHard resetting CDs Press the eject button Inserting or Removing CDInserting a CD Removing the CDFloppy Disk Inserting or removing a floppy disk PointInserting a floppy disk Removing the floppy disk Confirm that the floppy disk access lamp is offHardware What are peripheral devices? Before Installing a Peripheral DevicePage Location for installation File bay options On standard models Master and slaveSlave Master Removing the side and upper covers, and front panel Removing the CoverRemove the bracket Remove the side coverPage Tilt the front panel toward you before pulling it up Increasing the Memory Capacity Location of memory modules Applicable memory modulesMemory module combinations Installing/removing memory modules Remove the bracke Installing memory modulesInsert a memory module into the slot Reinstall the ductReinstall the bracket Reinstall the side cover Removing memory modulesInstalling Expansion Cards Applicable expansion cards Installing an expansion cardFix the expansion card with the one screw removed in Step Reinstall the bracket Installing an Internal Hard Disk Installing a disk in the internal hard disk baySet the jumper switch Attach the brackets to the PC unit Replace or install the internal hard diskConnect flat cables Connect the power cableInstalling a disk in the front access bay Installing front access bay options Installing Other DevicesInstall a front access bay option on the PC unit CD-ROM Reinstall the front panel and upper and side covers Set the installed hard disks using Bios Setup Page Troubleshooting Problems Network connection cannot be established Characters entered using the keyboard are not displayedData cannot be read from the CD-ROM drive Mouse cursor does not movePage Technical Information Maintenance of the Hardware Maintenance of the keyboardMaintenance of CDs Remove the mouse bottom cover Maintenance of the mouseRemove the ball and clean with water Clean inside the mouseCleaning of the floppy disk drive Precautions on PC Precautions on television/radioPreventing Television or Radio Interference Engage a lock you prepared with the mounting bracket Security of the CaseHardware Specifications Specifications of PC unitProduct name Point LAN controller Intel LAN adapter specificationsSound specifications Graphical specificationsPin No Signal name Description Connector specificationsCRT connector LAN connector 100BASE-TX/10BASE-TSerial connector Parallel connectorMouse connector Keyboard connectorUSB connector Disposal Other PrecautionsPower-saving function Windows 2000 models When using USB devicesAddition of LAN adapter Precautions on using displayReplacement of display USB hub Windows 2000 modelsAcpi standby mode Windows 2000 models Index Parallel connector

8000 SERIES specifications

The Fujitsu 8000 Series is a cutting-edge family of mainframe computers that exemplify the convergence of robust performance, advanced technologies, and unparalleled reliability. Designed to address the needs of modern enterprises, this series is particularly noted for its capabilities in supporting mission-critical applications, large-scale transactions, and data-intensive workloads.

At the heart of the Fujitsu 8000 Series lies the SPARC architecture, which enables exceptional processing power and efficiency. The architecture supports high levels of parallel processing, allowing multiple tasks to be executed simultaneously, thereby maximizing throughput and minimizing latency. This capability is crucial for organizations that require rapid and reliable data processing to keep pace with their operational demands.

One of the standout features of the 8000 Series is its advanced virtualization capabilities. This allows businesses to run multiple virtual machines on a single physical unit, optimizing resource utilization while reducing operational costs. The series also integrates robust security features, including hardware-level encryption and advanced access controls, ensuring that sensitive data and applications remain protected from evolving cyber threats.

The Fujitsu 8000 Series is built with energy efficiency in mind. Utilizing innovative cooling technologies and power management solutions, these systems achieve significant energy savings without compromising performance. This sustainability aspect is increasingly important for organizations looking to reduce their carbon footprint and operational expenditures.

Scalability is another hallmark of the Fujitsu 8000 Series. Organizations can easily expand their systems by adding additional processors, storage, and memory, providing the flexibility to grow alongside their changing business needs. This scalability is paired with a comprehensive suite of management tools that assist IT teams in monitoring system performance and health, streamlining maintenance, and reducing downtime.

Additionally, the Fujitsu 8000 Series supports a wide range of operating systems and enterprise applications, making it a versatile solution for businesses across various industries. Its compatibility with cloud services also facilitates hybrid IT environments, allowing organizations to leverage both on-premises and cloud resources efficiently.

In summary, the Fujitsu 8000 Series stands out for its exceptional processing power, advanced virtualization, energy efficiency, scalability, and robust security features. These characteristics make it a valuable asset for enterprises seeking to enhance their IT infrastructure and meet the demands of an increasingly complex digital landscape. With the Fujitsu 8000 Series, organizations can drive innovation, improve operational efficiency, and maintain a competitive edge in their respective markets.
Top Page Image Contents