Fujitsu 8000 SERIES Other Precautions, Disposal, Power-saving function Windows 2000 models

Page 83

5 Other Precautions

Disposal

Disposal of LCD

The fluorescent tube in the LCD contains mercury. When disposing of the PC, follow your local environmental rules and regulations.

Disposal of battery

Since batteries are used in the PC unit, an explosion may occur if it is thrown into a fire. When disposing of an old battery, follow your local environmental rules and regulations.

Power-saving function (Windows 2000 models)

Since Windows 2000 models support advanced power-saving mode (ACPI S3 mode), if you use an internal option of peripheral (e.g. a printer or USB device) that does not support the advanced power-saving mode, your PC may malfunction after returning from the standby mode.

In such cases, switch the standby mode from Advanced (ACPI S3) to Standard (ACPI SI).

USB (Windows 2000 models)

“USB” stands for “Universal Serial Bus”, which standardizes mouse, keyboard, printer, modem, and speaker interfaces.

￿Point

Some USB-compliant peripheral devices require a special device driver to be installed.

USB is supported by Windows 2000.

Depending on the type of a connected USB device, Windows may not be closed properly. In this case, remove the device and close Windows.

When using USB devices

To use USB devices in Safe mode, from BIOS Setup Utilities Main Menu, select [Advanced]– [Advanced System Configuration], then [USB Legacy Support] to set this option to [Enabled].

To use a USB keyboard on Windows 2000 models, set your PC as follows when connecting a scroll point mouse to your PC. Note that this setting disables the scrolling feature of the mouse. 1 Select [System] on the [Control Panel] window.

2 Click [Hardware] tab, then click [Device Manager].

3 Point to [PS/2 Mouse Properties] under [Mouse and other pointing devices] to open its window. 4 Double-click [Advanced Settings], set [Detect Wheel] to [Search for wheel], then click [OK].

73

Image 83
Contents Declaration of Conformity Deskpower 8000 Series User’s ManualImportant Safety Instructions Page Greetings Representing buttons Command entriesConventions used in this manual Representing keys and use thereofIllustrations Point HelpConventions used in the text of the manual Screen display examplesFujitsu Limited Introduction Manual configurationContents Problems Installing Expansion CardsInstalling an Internal Hard Disk Installing Other DevicesIntroduction Front of the PC unit Part Names and FunctionsPower lamp Headphone volume only for music CDsFloppy disk access lamp Hard disk access lampBack of the PC unit Outlet LAN connector Connect a LAN cable Line OUT terminalCRT connector InletDisplay card Expansion card slots Power supply unit Internal hard disk bayInside the PC unit Motherboard Point KeyboardAlt key Caps Lock/Alphanumeric keyCtrl control key Windows keyMoving the mouse Using the mouseUsing the mouse buttons MouseScrolling Double-clickingPointing DraggingExample of installation InstallationInstallation area Connection Connect the keyboard Connect the power cable to the outletConnect the power cable to the display Connect the LAN cable Connect the mouseConnect the display cable to the PC unit Connecting the power cable Page Turning on the power Turning On the PowerPress the power switch on the PC For Windows NT model Turning Off the PowerTurning off the power For Windows Me or 98 modelResetting the PC ResettingHard resetting CDs Press the eject button Inserting or Removing CDInserting a CD Removing the CDInserting a floppy disk Floppy DiskInserting or removing a floppy disk Point Removing the floppy disk Confirm that the floppy disk access lamp is offHardware What are peripheral devices? Before Installing a Peripheral DevicePage Location for installation File bay options On standard models Master and slaveSlave Master Removing the side and upper covers, and front panel Removing the CoverRemove the bracket Remove the side coverPage Tilt the front panel toward you before pulling it up Increasing the Memory Capacity Memory module combinations Location of memory modulesApplicable memory modules Installing/removing memory modules Remove the bracke Installing memory modulesInsert a memory module into the slot Reinstall the ductReinstall the bracket Reinstall the side cover Removing memory modulesInstalling Expansion Cards Applicable expansion cards Installing an expansion cardFix the expansion card with the one screw removed in Step Reinstall the bracket Set the jumper switch Installing an Internal Hard DiskInstalling a disk in the internal hard disk bay Attach the brackets to the PC unit Replace or install the internal hard diskConnect flat cables Connect the power cableInstalling a disk in the front access bay Installing front access bay options Installing Other DevicesInstall a front access bay option on the PC unit CD-ROM Reinstall the front panel and upper and side covers Set the installed hard disks using Bios Setup Page Troubleshooting Problems Network connection cannot be established Characters entered using the keyboard are not displayedData cannot be read from the CD-ROM drive Mouse cursor does not movePage Technical Information Maintenance of CDs Maintenance of the HardwareMaintenance of the keyboard Remove the mouse bottom cover Maintenance of the mouseRemove the ball and clean with water Clean inside the mouseCleaning of the floppy disk drive Preventing Television or Radio Interference Precautions on PCPrecautions on television/radio Engage a lock you prepared with the mounting bracket Security of the CaseProduct name Hardware SpecificationsSpecifications of PC unit Point LAN controller Intel LAN adapter specificationsSound specifications Graphical specificationsPin No Signal name Description Connector specificationsCRT connector LAN connector 100BASE-TX/10BASE-TSerial connector Parallel connectorUSB connector Mouse connectorKeyboard connector Disposal Other PrecautionsPower-saving function Windows 2000 models When using USB devicesAddition of LAN adapter Precautions on using displayReplacement of display USB hub Windows 2000 modelsAcpi standby mode Windows 2000 models Index Parallel connector

8000 SERIES specifications

The Fujitsu 8000 Series is a cutting-edge family of mainframe computers that exemplify the convergence of robust performance, advanced technologies, and unparalleled reliability. Designed to address the needs of modern enterprises, this series is particularly noted for its capabilities in supporting mission-critical applications, large-scale transactions, and data-intensive workloads.

At the heart of the Fujitsu 8000 Series lies the SPARC architecture, which enables exceptional processing power and efficiency. The architecture supports high levels of parallel processing, allowing multiple tasks to be executed simultaneously, thereby maximizing throughput and minimizing latency. This capability is crucial for organizations that require rapid and reliable data processing to keep pace with their operational demands.

One of the standout features of the 8000 Series is its advanced virtualization capabilities. This allows businesses to run multiple virtual machines on a single physical unit, optimizing resource utilization while reducing operational costs. The series also integrates robust security features, including hardware-level encryption and advanced access controls, ensuring that sensitive data and applications remain protected from evolving cyber threats.

The Fujitsu 8000 Series is built with energy efficiency in mind. Utilizing innovative cooling technologies and power management solutions, these systems achieve significant energy savings without compromising performance. This sustainability aspect is increasingly important for organizations looking to reduce their carbon footprint and operational expenditures.

Scalability is another hallmark of the Fujitsu 8000 Series. Organizations can easily expand their systems by adding additional processors, storage, and memory, providing the flexibility to grow alongside their changing business needs. This scalability is paired with a comprehensive suite of management tools that assist IT teams in monitoring system performance and health, streamlining maintenance, and reducing downtime.

Additionally, the Fujitsu 8000 Series supports a wide range of operating systems and enterprise applications, making it a versatile solution for businesses across various industries. Its compatibility with cloud services also facilitates hybrid IT environments, allowing organizations to leverage both on-premises and cloud resources efficiently.

In summary, the Fujitsu 8000 Series stands out for its exceptional processing power, advanced virtualization, energy efficiency, scalability, and robust security features. These characteristics make it a valuable asset for enterprises seeking to enhance their IT infrastructure and meet the demands of an increasingly complex digital landscape. With the Fujitsu 8000 Series, organizations can drive innovation, improve operational efficiency, and maintain a competitive edge in their respective markets.