Fujitsu 8000 SERIES user manual Installing/removing memory modules

Page 50

￿Important

•When you do not install an additional memory module in BANK2, insert the continuity module into it. When BANK2 has no module installed, the PC does not operate properly.

•The continuity module is not used on computers equipped with an additional memory module in BANK2 as a custom-made option. Therefore, memory combinations using the C-RIMM shown in the table cannot be chosen on such computers.

•Be sure to install memory modules of the same size to a combination of RIMM2 and RIMM3 and a combination of RIMM2 and RIMM4.

■Installing/removing memory modules

Here, procedures for installing and removing memory modules are explained with an example of replacement of the continuity module in RIMM1 with a memory module.

￿Point

•In installing or removing a continuity or memory module, hold the PC unit to prevent it from falling. Work will be easier on a PC in a horizontal position.

•A front access bay with a device installed may prevent you from installing and removing memory modules with ease. In that event, remove the PC cover after carrying out Step 3 in “Installing memory modules” and then remove the screws from the front access bay to slide the device toward the front of your PC.

•When returning the device back into the front access bay, use care not to allow it to touch the memory modules.

40

Page 49 Page 51
Image 50
Page 49 Page 51
Contents Deskpower 8000 Series User’s Manual Declaration of ConformityImportant Safety Instructions Page Greetings Representing keys and use thereof Command entriesConventions used in this manual Representing buttonsScreen display examples Point HelpConventions used in the text of the manual IllustrationsFujitsu Limited Manual configuration IntroductionContents Installing Other Devices Installing Expansion CardsInstalling an Internal Hard Disk ProblemsIntroduction Part Names and Functions Front of the PC unitHard disk access lamp Headphone volume only for music CDsFloppy disk access lamp Power lampBack of the PC unit Inlet LAN connector Connect a LAN cable Line OUT terminalCRT connector OutletDisplay card Expansion card slots Power supply unit Internal hard disk bayInside the PC unit Motherboard Keyboard PointWindows key Caps Lock/Alphanumeric keyCtrl control key Alt keyMouse Using the mouseUsing the mouse buttons Moving the mouseDragging Double-clickingPointing ScrollingExample of installation InstallationInstallation area Connection Connect the keyboard Connect the power cable to the outletConnect the power cable to the display Connect the LAN cable Connect the mouseConnect the display cable to the PC unit Connecting the power cable Page Turning On the Power Turning on the powerPress the power switch on the PC For Windows Me or 98 model Turning Off the PowerTurning off the power For Windows NT modelResetting Resetting the PCHard resetting CDs Removing the CD Inserting or Removing CDInserting a CD Press the eject buttonInserting a floppy disk Floppy DiskInserting or removing a floppy disk Point Confirm that the floppy disk access lamp is off Removing the floppy diskHardware Before Installing a Peripheral Device What are peripheral devices?Page Location for installation File bay options Master and slave On standard modelsSlave Master Removing the Cover Removing the side and upper covers, and front panelRemove the side cover Remove the bracketPage Tilt the front panel toward you before pulling it up Increasing the Memory Capacity Memory module combinations Location of memory modulesApplicable memory modules Installing/removing memory modules Installing memory modules Remove the brackeRemoving memory modules Reinstall the ductReinstall the bracket Reinstall the side cover Insert a memory module into the slotInstalling Expansion Cards Installing an expansion card Applicable expansion cardsFix the expansion card with the one screw removed in Step Reinstall the bracket Set the jumper switch Installing an Internal Hard DiskInstalling a disk in the internal hard disk bay Replace or install the internal hard disk Attach the brackets to the PC unitConnect the power cable Connect flat cablesInstalling a disk in the front access bay Installing Other Devices Installing front access bay optionsInstall a front access bay option on the PC unit CD-ROM Reinstall the front panel and upper and side covers Set the installed hard disks using Bios Setup Page Troubleshooting Problems Mouse cursor does not move Characters entered using the keyboard are not displayedData cannot be read from the CD-ROM drive Network connection cannot be establishedPage Technical Information Maintenance of CDs Maintenance of the HardwareMaintenance of the keyboard Clean inside the mouse Maintenance of the mouseRemove the ball and clean with water Remove the mouse bottom coverCleaning of the floppy disk drive Preventing Television or Radio Interference Precautions on PCPrecautions on television/radio Security of the Case Engage a lock you prepared with the mounting bracketProduct name Hardware SpecificationsSpecifications of PC unit Point Graphical specifications LAN adapter specificationsSound specifications LAN controller IntelLAN connector 100BASE-TX/10BASE-T Connector specificationsCRT connector Pin No Signal name DescriptionParallel connector Serial connectorUSB connector Mouse connectorKeyboard connector When using USB devices Other PrecautionsPower-saving function Windows 2000 models DisposalUSB hub Windows 2000 models Precautions on using displayReplacement of display Addition of LAN adapterAcpi standby mode Windows 2000 models Index Parallel connector

8000 SERIES specifications

The Fujitsu 8000 Series is a cutting-edge family of mainframe computers that exemplify the convergence of robust performance, advanced technologies, and unparalleled reliability. Designed to address the needs of modern enterprises, this series is particularly noted for its capabilities in supporting mission-critical applications, large-scale transactions, and data-intensive workloads.

At the heart of the Fujitsu 8000 Series lies the SPARC architecture, which enables exceptional processing power and efficiency. The architecture supports high levels of parallel processing, allowing multiple tasks to be executed simultaneously, thereby maximizing throughput and minimizing latency. This capability is crucial for organizations that require rapid and reliable data processing to keep pace with their operational demands.

One of the standout features of the 8000 Series is its advanced virtualization capabilities. This allows businesses to run multiple virtual machines on a single physical unit, optimizing resource utilization while reducing operational costs. The series also integrates robust security features, including hardware-level encryption and advanced access controls, ensuring that sensitive data and applications remain protected from evolving cyber threats.

The Fujitsu 8000 Series is built with energy efficiency in mind. Utilizing innovative cooling technologies and power management solutions, these systems achieve significant energy savings without compromising performance. This sustainability aspect is increasingly important for organizations looking to reduce their carbon footprint and operational expenditures.

Scalability is another hallmark of the Fujitsu 8000 Series. Organizations can easily expand their systems by adding additional processors, storage, and memory, providing the flexibility to grow alongside their changing business needs. This scalability is paired with a comprehensive suite of management tools that assist IT teams in monitoring system performance and health, streamlining maintenance, and reducing downtime.

Additionally, the Fujitsu 8000 Series supports a wide range of operating systems and enterprise applications, making it a versatile solution for businesses across various industries. Its compatibility with cloud services also facilitates hybrid IT environments, allowing organizations to leverage both on-premises and cloud resources efficiently.

In summary, the Fujitsu 8000 Series stands out for its exceptional processing power, advanced virtualization, energy efficiency, scalability, and robust security features. These characteristics make it a valuable asset for enterprises seeking to enhance their IT infrastructure and meet the demands of an increasingly complex digital landscape. With the Fujitsu 8000 Series, organizations can drive innovation, improve operational efficiency, and maintain a competitive edge in their respective markets.
Top Page Image Contents