6 Installing Other Devices
■Installing front access bay options
Install a front access bay option such as internal hard disk and
Point
•A SCSI card must be installed before installing an internal SCSI option.
•A SCSI ID must be set for an internal SCSI option to be installed. Refer to the related manual and set a unique SCSI ID.
•Before installing an internal IDE option, set it to Master, Slave or
1Disconnect the power plug from the outlet.
2Remove the side and upper covers and front panel.
3Remove the blank panel from the front panel. Remove two screws from both edges of the blank panel.
The blank panel need not be removed when installing an internal hard disk.
51