Fujitsu 8000 SERIES user manual Point, Installing a disk in the front access bay

Page 60

10Install the side cover.

11Set the installed hard disks using BIOS Setup.

Set the type of the installed internal hard disk using [Main]-[IDE Drive 1] of BIOS Setup for that installed first or [IDE Drive 2] for the second (set to [Auto] by default).

￿Point

To remove hard disks, reverse the procedure for installing them.

After installing the first internal hard disk, use the attached Recovery CD-ROM boot disk to configure partitions and install OS for each partition.

After installing the second internal hard disk, configure as follows:

-For Windows NT model

On Disk Administrator, configure partitions and format the hard disk. Disk Administrator is activated by clicking the [Start] button, [Program], then [Administration tools (common)].

-For Windows 2000 model

On Disk Administrator, configure partitions and format the hard disk. Administrate the Disk is under the Storage Area displayed by clicking the [Start] button, [Program], then [Administrate the Computer].

Installing a disk in the front access bay

In installing the hard disk drive in the front access bay, see “Installing Other Devices”.

￿Point

To remove hard disks, reverse the procedure for installing them.

After installing the first internal hard disk, use the attached Recovery CD-ROM boot disk to configure partitions and install OS for each partition.

After installing the second internal hard disk, configure as follows:

-For Windows NT model

On “Disk Administrator”, configure partitions and format the hard disk. “Disk Administrator” is activated by clicking the [Start] button, [Program], then [Administrative tools (common)].

-For Windows 2000 model

Using “Disk Management”, configure partitions and format the hard disk. “Disk Management” is under Storage branch displayed by clicking the [Start] button, [Program], then [Computer Management].

50

Image 60
Contents Deskpower 8000 Series User’s Manual Declaration of ConformityImportant Safety Instructions Page Greetings Command entries Conventions used in this manualRepresenting keys and use thereof Representing buttonsPoint Help Conventions used in the text of the manualScreen display examples IllustrationsFujitsu Limited Manual configuration IntroductionContents Installing Expansion Cards Installing an Internal Hard DiskInstalling Other Devices ProblemsIntroduction Part Names and Functions Front of the PC unitHeadphone volume only for music CDs Floppy disk access lampHard disk access lamp Power lampBack of the PC unit LAN connector Connect a LAN cable Line OUT terminal CRT connectorInlet OutletPower supply unit Internal hard disk bay Inside the PC unitDisplay card Expansion card slots Motherboard Keyboard PointCaps Lock/Alphanumeric key Ctrl control keyWindows key Alt keyUsing the mouse Using the mouse buttonsMouse Moving the mouseDouble-clicking PointingDragging ScrollingInstallation Installation areaExample of installation Connection Connect the power cable to the outlet Connect the power cable to the displayConnect the keyboard Connect the mouse Connect the display cable to the PC unitConnect the LAN cable Connecting the power cable Page Turning On the Power Turning on the powerPress the power switch on the PC Turning Off the Power Turning off the powerFor Windows Me or 98 model For Windows NT modelResetting Resetting the PCHard resetting CDs Inserting or Removing CD Inserting a CDRemoving the CD Press the eject buttonFloppy Disk Inserting or removing a floppy disk PointInserting a floppy disk Confirm that the floppy disk access lamp is off Removing the floppy diskHardware Before Installing a Peripheral Device What are peripheral devices?Page Location for installation File bay options Master and slave On standard modelsSlave Master Removing the Cover Removing the side and upper covers, and front panelRemove the side cover Remove the bracketPage Tilt the front panel toward you before pulling it up Increasing the Memory Capacity Location of memory modules Applicable memory modulesMemory module combinations Installing/removing memory modules Installing memory modules Remove the brackeReinstall the duct Reinstall the bracket Reinstall the side coverRemoving memory modules Insert a memory module into the slotInstalling Expansion Cards Installing an expansion card Applicable expansion cardsFix the expansion card with the one screw removed in Step Reinstall the bracket Installing an Internal Hard Disk Installing a disk in the internal hard disk baySet the jumper switch Replace or install the internal hard disk Attach the brackets to the PC unitConnect the power cable Connect flat cablesInstalling a disk in the front access bay Installing Other Devices Installing front access bay optionsInstall a front access bay option on the PC unit CD-ROM Reinstall the front panel and upper and side covers Set the installed hard disks using Bios Setup Page Troubleshooting Problems Characters entered using the keyboard are not displayed Data cannot be read from the CD-ROM driveMouse cursor does not move Network connection cannot be establishedPage Technical Information Maintenance of the Hardware Maintenance of the keyboardMaintenance of CDs Maintenance of the mouse Remove the ball and clean with waterClean inside the mouse Remove the mouse bottom coverCleaning of the floppy disk drive Precautions on PC Precautions on television/radioPreventing Television or Radio Interference Security of the Case Engage a lock you prepared with the mounting bracketHardware Specifications Specifications of PC unitProduct name Point LAN adapter specifications Sound specificationsGraphical specifications LAN controller IntelConnector specifications CRT connectorLAN connector 100BASE-TX/10BASE-T Pin No Signal name DescriptionParallel connector Serial connectorMouse connector Keyboard connectorUSB connector Other Precautions Power-saving function Windows 2000 modelsWhen using USB devices DisposalPrecautions on using display Replacement of displayUSB hub Windows 2000 models Addition of LAN adapterAcpi standby mode Windows 2000 models Index Parallel connector

8000 SERIES specifications

The Fujitsu 8000 Series is a cutting-edge family of mainframe computers that exemplify the convergence of robust performance, advanced technologies, and unparalleled reliability. Designed to address the needs of modern enterprises, this series is particularly noted for its capabilities in supporting mission-critical applications, large-scale transactions, and data-intensive workloads.

At the heart of the Fujitsu 8000 Series lies the SPARC architecture, which enables exceptional processing power and efficiency. The architecture supports high levels of parallel processing, allowing multiple tasks to be executed simultaneously, thereby maximizing throughput and minimizing latency. This capability is crucial for organizations that require rapid and reliable data processing to keep pace with their operational demands.

One of the standout features of the 8000 Series is its advanced virtualization capabilities. This allows businesses to run multiple virtual machines on a single physical unit, optimizing resource utilization while reducing operational costs. The series also integrates robust security features, including hardware-level encryption and advanced access controls, ensuring that sensitive data and applications remain protected from evolving cyber threats.

The Fujitsu 8000 Series is built with energy efficiency in mind. Utilizing innovative cooling technologies and power management solutions, these systems achieve significant energy savings without compromising performance. This sustainability aspect is increasingly important for organizations looking to reduce their carbon footprint and operational expenditures.

Scalability is another hallmark of the Fujitsu 8000 Series. Organizations can easily expand their systems by adding additional processors, storage, and memory, providing the flexibility to grow alongside their changing business needs. This scalability is paired with a comprehensive suite of management tools that assist IT teams in monitoring system performance and health, streamlining maintenance, and reducing downtime.

Additionally, the Fujitsu 8000 Series supports a wide range of operating systems and enterprise applications, making it a versatile solution for businesses across various industries. Its compatibility with cloud services also facilitates hybrid IT environments, allowing organizations to leverage both on-premises and cloud resources efficiently.

In summary, the Fujitsu 8000 Series stands out for its exceptional processing power, advanced virtualization, energy efficiency, scalability, and robust security features. These characteristics make it a valuable asset for enterprises seeking to enhance their IT infrastructure and meet the demands of an increasingly complex digital landscape. With the Fujitsu 8000 Series, organizations can drive innovation, improve operational efficiency, and maintain a competitive edge in their respective markets.