![](/images/new-backgrounds/1100062/100062101x1.webp)
●Installing memory modules
1 Disconnect the power plug from the outlet.
2Remove the side cover.
Confirm that the memory power LED is off. If the memory power LED is on, disconnect the power cable from your PC before preceeding.
3Remove the bracke.
4Remove the duct. Remove the two screws.
5 Open the hook on both sides of the slot outward to remove the memory module.
Point
•Do not open the hooks too violently. Otherwise, the memory module may jump out of the slot and become faulty.
•Keep the removed continuity module in a safe place.
41