Dimension One Spas Sarena Bay Programming the Scrolling Message Center, Summer Mode Standby Mode

Page 34
Summer Mode

Summer Mode

Standby Mode

2003 Sarena Bay™

Export Owner’s Manual

The “SUMMER MODE” feature temporarily disables the circulation pump “Cool Off” cycle. During hot weather the spa can experience “Heat Creep”. Heat creep is caused when the spa, during normal maintenance operations, cannot dissipate more heat than is generated. This may cause the spa temperature to exceed the set temperature and cause a “Cool Off” cycle. In order to prevent the water from becoming cloudy due to the circulation pump being turned off by the “Cool Off” cycle, the spa can be set to bypass the “Cool Off” cycle. This is accomplished by setting the spa in the “SUMMER MODE”.

To initiate a “SUMMER MODE”, use the Up and Down Buttons to set the temperature to 15°C (≅59° F). The Digital Display Window will indicate “SUMMER MODE”. In this mode the pump will run continuously until the water temperature reaches 41° C (≅107°F) and then turn off. It will remain off until the water temperature reaches 38° C (≅102° F) at which point the pump turns on.

The “STANDBY” mode allows the user to clean the filter without turning off power to the spa. This feature disables all automatic and manual functions.

To enter the “STANDBY” mode press and hold the Dimension One Spa’s ICON Logo→ Button for 5 seconds. To exit the mode, press and hold the Logo Button for 5 seconds.

If you do not exit the mode manually, the spa will automatically return to normal functionality after 24 hours.

The “Smart Winter” mode is not affected by the use of the “Standby”: mode.

Note

Programming the Scrolling Message Center

Your Scrolling Message Center is the most advanced in the industry and can virtually walk you through customizing your hot tub to your exact needs. To initiate the programming sequence at any time, push and hold the Program Button for 3 seconds. If, within 10 seconds, you do not proceed with the hot tub programming, the hot tub will automatically exit the programming sequence and revert to the pre-set factory default settings. To exit the programming sequence at any time, push the Enter Button or do not press any button for 10 seconds. Any programming changes made up to that point are saved.

Setting the Time

After holding the PROGRAM Button, the top line of the Digital Display Window will read “SET TIME OF DAY” and the bottom line will read “PUSH UP OR DOWN TO CHANGE - PUSH PROGRAM TO SELECT NEXT FUNCTION - PUSH ENTER TO EXIT ”. Push the UP or DOWN Buttons to engage the time setting mode. The time screen will appear with “hours” (_ _.00) flashing on and off. Push the UP or DOWN Button to increase or decrease the number until the desired hour appears. When the desired number is displayed, push the LIGHT Button to accept the selection and change the flashing number to the “ten minute” place (12:_0). Adjust the number with the UP or DOWN Button in the same manner as the hour number. When the desired indicator is displayed, push the LIGHT Button to accept the selection and change the flashing number to the “minute” place (12:1_). Adjust this number with the UP or DOWN

28

Page 33 Page 35
Image 34
Page 33 Page 35
Contents Page 2003 Sarena Bay Export Owner’s Manual HYDROSPORT AQUATIC FITNESS GEAR OPTIONAL Table of ContentsPERSONAL THERAPY CONTROL PATENT PENDING SWITCHES Export Owner’s Manual2003 Sarena Bay USING THE TOP SIDE CONTROLSADJUSTING THE FOUNTAIN Export Owner’s ManualSPECIAL COLD WEATHER INSTRUCTIONS 2003 Sarena Bay Export Owner’s Manual READ AND FOLLOW ALL INSTRUCTIONS CAREFULLY Safety FirstIMPORTANT SAFETY INSTRUCTIONS READ AND FOLLOW ALL INSTRUCTIONS CAREFULLYTo Reduce the Risk of Injury Hyperthermia DON’T block or sit on the filter recess area Do’s and Don’tsDon’t DON’T allow horseplay or unsupervised use of your Sarena BayWarning Signs Dimension One Spas 2611 Business Park Drive Vista, CA 760Dynamic LED Underwater Lighting Sarena Bay FeaturesPersonal Therapy Control Patent Pending Switches FountainRevolutionary Design Features Innovative Seating - ForPivot feature BioForm ReclinersBio-Wall / Bench Seat “No-float” angles Upright position Multiple Lounges AccommodateBench Seat Pivot Seatjets Frontal Therapy SeatSport Zone Seat the front part of the upper and lowerTop Side Control Additional Design FeaturesScrolling Message Center section Fountain PTC SwitchesDynamic Massage Sequencer Synchronous Spa LightsHydroSport / OptiMounts Weir Basket / SkimmerSoft Tile Pillow InfraRed Sensor NeckFlex Jet PillowJet System Selector Valve Remotely Control The Sarena BaySmart Heat UltraPure Water Management SystemVision Load SharingHydroSport Aquatic Fitness Gear Optional D1 Remote Control OptionalSonic Immersion System SIS Optional Initial Startup Weir Skimmer/Filter 2003 Sarena Bay Export Owner’s Manual 2003 Sarena Bay Export Owner’s Manual Operation Using The Top Side ControlsScrolling Message Center Jet Pump 3 Button JETS 1&2 ButtonFeature Water Feature Button Up / Down Buttons Light / Enter Button PROGRAM ButtonRinse Filters Clean Filters Heat Status Light Dimension One Spas ICON Logo→Scrolling Message Center Messages Spa Check Up DO NOT ENTER THE WATER when “OVERHEAT” is displayed onChange Water Change Vision Cartridge OverheatErroneous Temperature on the Display Ice Flashing Display and/or “Check Water Level”Cooling Programming the Scrolling Message Center Setting the TimeSummer Mode Standby Mode Number of Filter Cycles Filter Cycle Start TimeFilter Cycle Duration Pump Run TimeWaterfall Run Time Temperature Unit SelectionVision Cartridge Digital Display Window InvertProgramming Lock Control Panel ResetProgramming Unlock LIGHT Button Dynamic Massage SequencerControl Panel Description JETS ButtonSEQUENCE Button SPEED ButtonBEGIN/PAUSE Button Massage ZonesZone B Massage Zone DescriptionZone A Zone CZone F Operating the Dynamic Massage SequencerAdjusting Water Flow Adjusting the FountainJet System Selector Valve Standard VCR Jets→ - Directional Adjustable and Interchangeable JetsStandard VCR Jets→ - Rotator a Mini VCR Jets→- Rotator Mini VCR Jets→ - RotatorMini VCR Jets→ - Directional Euro Jets - DirectionalFilter Cleaning Routine Equipment MaintenanceDraining Your Equipment Surface Care Light Bulb ReplacementUltralife→ Shell Care for the Wood Spa Cabinet Dimension One “ EnviroTect” Skirts and Vinyl CoversSpecial Cold Weather Instructions Items Required for WinterizingProcedure for Winterizing Spring Time Startup Warranty Service Information Term Glossary of TermsDefinition Pump Problem Troubleshooting GuideSymptom Heating SystemElectrical System Cont Water System2003 Sarena Bay Export Owner’s Manual 2003 Sarena Bay Export Owner’s Manual
Top Page Image Contents