Exmark LAZER Z HP manual Hydrostatic Ground Drive System, Tires, Cutting Deck

Page 18

2.5.5Deck Lift Assist Lever: Foot pedal that assists in raising the deck.

2.6SEAT

2.6.1Type:

All units except Kohler EFI: Standard seat with high back, foam padded (internal suspension) and armrests.

Kohler EFI units: Standard seat with high back, foam padded (internal suspension), armrests and a custom ride suspension system.

Optional seat accessories:

•Custom ride suspension system to enhance Standard Seat.

•Deluxe suspension seat with high back, low profile foam-in-place cushion (dampened, adjustable spring suspension) and armrests.

2.6.2Mounting: Hinged to tilt up for access to hydraulic pumps, battery and other components. Held in tilted position with prop rod. Adjustable fore and aft seat track.

2.6.3Armrests: Standard seat: foam padded flip-up armrests with height adjustment. Optional suspension seat: molded adjustable flip-up armrests.

2.6.4Seat Safety Switch: Incorporated into the Safety Interlock System. Time delay seat switch eliminates rough ground cut-outs.

2.7HYDROSTATIC GROUND DRIVE SYSTEM

2.7.1Hydrostatic Pumps: Two Hydro Gear PJ variable displacement piston pumps.

2.7.2Wheel Motors: Two Parker TL with 1 1/4” tapered shafts.

2.7.3Hydraulic Oil Type: Synthetic Mobil 1 15W-50.

2.7.4Hydraulic Oil Capacity: 2.1 qt.(2.0 L.)

2.7.5Hydraulic Filter: Replaceable cartridge type.

P/N 1-513211: 10 microns, 18 psi bypass (Summer use above 32° F (0°C))

P/N 1-523541: 40 microns, 18 psi bypass (Winter use below 32° F (0°C))

2.7.6Speeds: 0-9.8 mph (15.8 km/hr) forward. 0-6.3 mph (10.1 km/hr) reverse.

2.7.7Drive wheel release valves allow machine to be moved when engine is not running.

2.8 TIRES

Drive

Front Caster

 

 

Pneumatic (Air-Filled)

Semi-Pneumatic

 

Deck Size

52”

60” & 72”

All Decks

 

Quantity

2

2

2

 

Tread

“Multi-

Trac C/S”

Smooth

 

Size

24 x 9.50-12

24 x 12.00-12

13 x 6.50-6

 

Ply Rating

4

4

 

 

Pressure

13 psi (90 kPa)

13 psi (90 kPa)

 

2.9 CUTTING DECK

2.9.1

Cutting Width:

52 in. (132.1 cm)

 

 

60 in. (152.4 cm)

 

 

72 in. (182.9 cm)

2.9.2Discharge: Side

2.9.3 Blade Size: (3 ea.) w/52” Deck 18.0 in. (45.7 cm) w/60” Deck 20.5 in. (52.1 cm) w/72” Deck 24.5 in. (62.2 cm)

2.9.4Blade Spindles: Solid steel spindles with 1” I.D. bearings.

- 13 -

Page 17 Page 19
Image 18
Page 17 Page 19
Contents For Serial Nos 540,000 & Higher Potential Hazard Exmark Parts PLUS→ Program Operators Manual Table of Contents Safety Alert Symbol SafetyYour Safety is Involved TrainingCarbon monoxide can kill you Potential Hazard Operation Safe Zone for Mowing There is no rollover protection when the roll bar is down Maintenance and Storage Safety Signs For Kohler EFI UnitsPage Do not Operate Without Guard Page Specifications Hydrostatic Ground Drive System TiresCutting Deck Dimensions Torque RequirementsAssembly Instructions Uncrate Mower Install Rollover Protection System Roll BARLower Roll BAR Installation Service Battery Upper Roll BAR InstallationMachine is shipped with a filled lead acid battery Install Canister AIR Cleaner Install Drive WheelsInstall Seat Check Tire PressurePosition Discharge Chute Install Motion Control LeversService Engine Service Hydraulic OIL Control ARM ShaftOperation Instructions ControlsMotion Control Positions Push the lever forward and down to disengage the brake PRE-START MachineOperating Instructions Transporting Maintenance & Adjustments Periodic Maintenance Service Interval DailyService Interval Monthly Service Interval Daily or more often in dry conditions Blade Bolt Installation Check rollover protections systems roll bar pins Kohler EFI engines only Service Interval 50 hours Service Interval 100 hrsService Interval 40 hr Lubrication Chart Service Interval 40 hrsService Interval Refer to chart Service Interval Once Yearly Caster Wheel AssemblyService Interval 160 hrs Service Interval 80 hrs Service Interval As RequiredKohler EFI Fuel Line Routing Service Interval After First 250 hrs Then yearly thereafter Service Interval 500 hrsAdjustments Cutting Height PositionANTI-SCALP Roller Adjustment Swivel Adjustment Spring Compression Adjustment Self-tensioning No adjustment necessaryMule Drive Belt Adjustment Brake Adjustment Belt Guide PositioningNo adjustment necessary Reverse Indicator AdjustmentThrottle Tension Motion Control Adjustment Caster Adjustment Waste DisposalMotor OIL Disposal Mower Pulls Left or Right W/LEVERS Fully Forward Trouble ShootingBattery Disposal Mower Cuts UnevenlyEngine Troubleshooting Table ProblemEngine Warning Systems Electrical Diagram Kohler 23 & 27 HP AIR-COOLED Units Electrical Diagram Kohler EFI Units Hydraulic Diagram Year Limited Warranty Exmark Turf Equipment Page See EXMARK’S Complete Line of Accessories
Related manuals
Manual 24 pages 40.18 Kb

LAZER Z HP specifications

The Exmark LAZER Z HP is a standout zero-turn lawn mower known for its exceptional performance, durability, and user-friendly design. Ideal for both residential and commercial landscapers, this machine combines cutting-edge technology with practical features to deliver a top-notch mowing experience.

One of the main features of the LAZER Z HP is its powerful engine options. Available with either Kohler or Kawasaki engines, this mower provides reliability and robust performance. With horsepower ranging from 22 to 27, it can tackle even the toughest mowing conditions, whether it's thick grass or uneven terrain. This power is matched by an efficient fuel system that ensures long operational periods without frequent refueling.

Another notable aspect of the LAZER Z HP is its innovative cutting technology. Equipped with a patented UltraCut deck, the mower is designed for superior grass handling and an exceptional cut quality. The deck is available in various sizes, typically ranging from 48 to 60 inches, allowing users to choose the most suitable option for their lawn size and type. The unique design of the mower deck promotes an even cut and excellent discharge, ensuring that clippings are finely shredded and evenly spread across the lawn.

The LAZER Z HP also boasts a user-friendly interface. Its intuitive controls and ergonomic seating allow for comfortable operation over extended periods. The adjustable seat and control arms can be customized to fit the operator, reducing fatigue and enhancing productivity. Additionally, the dual hydrostatic drive system enables smooth and precise maneuverability, allowing users to navigate around obstacles with ease.

Durability is a hallmark of the Exmark brand, and the LAZER Z HP is no exception. Constructed with high-quality materials, it features a robust frame and durable components designed to withstand the rigors of daily use. Exmark's commitment to quality ensures that owners can rely on this mower season after season.

Overall, the Exmark LAZER Z HP is an impressive machine that merges power, precision, and user comfort. With its innovative cutting technology, robust engine options, and durable design, it stands out as a top choice for anyone looking to maintain a pristine lawn. Whether you are a professional landscaper or a dedicated homeowner, the LAZER Z HP delivers the performance and reliability needed to achieve outstanding results.
Top Page Image Contents