Trouble Shooting, Battery Disposal | Exmark LAZER Z HP guide

6.2 BATTERY DISPOSAL

DANGER

POTENTIAL HAZARD

♦Battery electrolyte contains sulfuric acid, which is poisonous and can cause severe burns

WHAT CAN HAPPEN

♦Swallowing electrolyte can be fatal or if it touches skin can cause severe burns.

HOW TO AVOID THE HAZARD

♦Wear safety glasses to shield eyes, and rubber gloves to protect skin and clothing when handling electrolyte.

♦Do not swallow electrolyte.

Federal law states that batteries should not be placed in the garbage. Management and disposal practices must be within relevant federal, state, or local laws.

If a battery is being replaced or if the unit containing the battery is no longer operating and is being scrapped, take the battery to a local certified recycling center. If no local recycling is available return the battery to any certified battery reseller.

7.TROUBLE SHOOTING

7.1MOWER PULLS LEFT OR RIGHT (W/LEVERS FULLY FORWARD).

a)Refer to Tracking Adjustment Section 4.1.3.

b)Check air pressure in drive tires; 13 psi Semi-pneumatic casters do not require inflation.

c)Check reverse indicator and motion control linkage adjustment. See section 5.2.12 and 5.2.13.

7.2MOWER CUTS UNEVENLY.

a)Check air pressure in drive tires; 13 psi. Semi-pneumatic casters do not require inflation.

A more uniform cutting height may be obtained with higher tire pressure on rough terrain.

A lower tire pressure provides more flotation.

b)Check deck support chains.

c)Check deck leveling (See Adjustments Section 5.2.2.)

Note: The front of the mower deck will be approximately 1/4” lower than the back of the mower deck. This is the “rake” of the deck.

d)Check blades tip to tip for straightness (they should be within 3/16" or one blade width from being in line.)

7.3ENGINE WILL NOT START.

a)Make sure the battery has a full charge. See section 5.1.3 for charging instructions.

b)For all units except Kohler EFI: Be sure the throttle control is midway between the “SLOW” and “FAST” positions, and the choke is in the “ON” position for a cold engine or the “OFF” position for a warm engine.

c)Make sure there is fuel in the fuel tank and that the fuel valve is open.

d)Be sure the seat switch is properly adjusted. See Section 5.2.6.

e)Make sure the parking brake is set and motion control levers are moved out (neutral lock position).

f)Check that the PTO is disengaged.

-44 -

LAZER Z HP specifications

The Exmark LAZER Z HP is a standout zero-turn lawn mower known for its exceptional performance, durability, and user-friendly design. Ideal for both residential and commercial landscapers, this machine combines cutting-edge technology with practical features to deliver a top-notch mowing experience.

One of the main features of the LAZER Z HP is its powerful engine options. Available with either Kohler or Kawasaki engines, this mower provides reliability and robust performance. With horsepower ranging from 22 to 27, it can tackle even the toughest mowing conditions, whether it's thick grass or uneven terrain. This power is matched by an efficient fuel system that ensures long operational periods without frequent refueling.

Another notable aspect of the LAZER Z HP is its innovative cutting technology. Equipped with a patented UltraCut deck, the mower is designed for superior grass handling and an exceptional cut quality. The deck is available in various sizes, typically ranging from 48 to 60 inches, allowing users to choose the most suitable option for their lawn size and type. The unique design of the mower deck promotes an even cut and excellent discharge, ensuring that clippings are finely shredded and evenly spread across the lawn.

The LAZER Z HP also boasts a user-friendly interface. Its intuitive controls and ergonomic seating allow for comfortable operation over extended periods. The adjustable seat and control arms can be customized to fit the operator, reducing fatigue and enhancing productivity. Additionally, the dual hydrostatic drive system enables smooth and precise maneuverability, allowing users to navigate around obstacles with ease.

Durability is a hallmark of the Exmark brand, and the LAZER Z HP is no exception. Constructed with high-quality materials, it features a robust frame and durable components designed to withstand the rigors of daily use. Exmark's commitment to quality ensures that owners can rely on this mower season after season.

Overall, the Exmark LAZER Z HP is an impressive machine that merges power, precision, and user comfort. With its innovative cutting technology, robust engine options, and durable design, it stands out as a top choice for anyone looking to maintain a pristine lawn. Whether you are a professional landscaper or a dedicated homeowner, the LAZER Z HP delivers the performance and reliability needed to achieve outstanding results.