Husqvarna 216 Awd manual Safety Instructions, Safety instructions, Insure your Rider, General use

Page 8

SAFETY INSTRUCTIONS

Safety instructions

These instructions are for your safety. Read them carefully.

Insure your Rider

Check the insurance coverage for your new Rider.

Contact your insurance company.

You should have fully comprehensive insurance including: third party, fire, damage, theft and liability

General use

Read all the instructions in this operator’s manual and on the machine before you start it. Ensure you understand them and then observe them.

WARNING! This machine produces an

!electromagnetic field during operation. This field may under some circumstances interfere with active or passive medical implants. To reduce the risk of serious or fatal injury, we recommend persons with medical implants to consult their physician and the medical implant manufacturer before operating this machine.

Learn how to use the machine and its controls safely and learn to how to stop quickly. Also learn to recognize the safety decals.

Only allow the machine to be used by adults who are familiar with its use.

Make sure nobody else is in the vicinity of the machine when you start the engine, engage the drive or drive off.

Clear the area of objects such as stones, toys, wires, etc. that may become caught in the blades and be thrown out.

Stop the engine and prevent the engine from being started until you have cleaned the outlet channel.

Look out for the ejector and do not direct it towards anyone.

Stop the engine and prevent it from starting before you clean the cutting unit.

Remember that the driver is responsible for dangers or accidents.

Never carry passengers. The machine is only intended to be used by one person.

Always look downwards and backwards before and while reversing. Keep watch for both large and small obstacles.

Slow before cornering.

Switch off the blades when you are not mowing.

Take care when rounding a fixed object, so that the blades do not hit it. Never run the machine over foreign objects.

!

WARNING! This machine can sever hands

and feet as well as throw objects. Failure to

observe the safety instructions can result in

 

serious injuries.

!

WARNING! The inside of the muffler contain

chemicals that may be carcinogenic. Avoid

contact with these elements in the event of a

 

damaged muffler.

!

WARNING! The engine emits carbon

monoxide, which is a colourless, poisonous

gas. Do not use the machine in enclosed

 

spaces.

Only use the machine in daylight or in other well-lit conditions. Keep the machine at a safe distance from holes or other irregularities in the ground. Pay attention to other possible risks.

Never use the machine if you are tired, if you have consumed alcohol, or if you are taking other drugs or medication that can affect your vision, judgement or co- ordination.

Keep an eye on the traffic when working close to a road or when crossing it.

Never leave the machine unsupervised with the engine running. Always stop the blades, apply the parking brake, stop the engine and remove the keys before leaving the machine.

8 – English

Image 8
Contents Rider 213 C Rider 216 Rider 216 AWD EnglishContents KEY to Symbols SymbolsKEY to Symbols Introduction After the first 8 hours Service journalPre-delivery service What is WHAT? Location of the controlsSafety Instructions Safety instructionsInsure your Rider General useDriving on slopes This is what you doMaintenance ChildrenTransport Presentation PresentationCutting unit Lifting lever for the cutting unitCutting height adjustment lever SeatFueling Release lever Rider 213 C, RiderStart the engine DrivingBefore starting Starting the engine with a weak battery Connecting the jump leadsDriving the Rider Remove the cables in the reverse orderOther objects which can be thrown out by the blades Cutting tipsStop the engine Maintenance Maintenance scheduleMaintenance Daily maintenance At least once Before starting Interval in hoursRemoving of the machine hoods CleaningChecking and adjusting the steering wires Adjusting the parking brake Rider 213 C, Rider Adjusting the parking brake Rider 216 AWDAdjusting the throttle wire Result in reduced braking abilityChecking the fuel pump’s air filter Replacement of fuel filterReplacing the air filter Check the safety system Checking the tyre pressureIgnition system FusesChecking the cutting unit’s parallelism Adjusting the parallelism of the cutting unitWhen the engine is running. Mind your fingers Service position for the cutting unit Placing in the service positionCombi Removing the BioClip plugChecking the blades Lubrication Checking the engine’s oil levelReplacing the engine oil Changing the oil filterLubricating the belt adjuster Checking the transmission oil levelGeneral lubrication Rider 216 AWDTroubleshooting schedule Service StorageWinter storage GuardTechnical Data Cutting unit Combi EC-declaration of conformity Applies to Europe only 1155329-26 ´z+W@¶6a¨ ´z+W@¶6a¨ Original instructions