Canon 08011-41-UD2-003 manual 118

3. Select the severity level from the Severity Level drop-down list.

The table below shows the supported levels of increasing severity and their respective numeric codes.

Severity Level	Numeric Code
Emergency	0
Alert	1
Critical	2
Error	3
Warning	4
Notice	5
Info	6
Debug	7

When you select a severity from the drop-down list, that severity and all severities with a lower numeric value are logged.

The default setting is ‘Debug’. If [Debug] is selected, all severities are logged.

118 Authorized Send Installation and Configuration Guide for imageRUNNER Machines