Canon 08011-41-UD2-003 6.3MAIN Screen Notification Messages, 6.3.1LDAP Failure Notification Messages

6.3MAIN Screen Notification Messages

The MAIN screen notification messages are displayed on the MAIN screen in the upper-right hand portion of the MEAP device’s UI. If an error has occurred during the authentication process, it will be displayed here.

6.3.1LDAP Failure Notification Messages

This section explains the LDAP failure notification messages, along with possible causes and remedies.

These errors will not prevent you from authenticating into Authorized Send. However, [Scan to E-Mail] and [Scan to Fax] will be disabled, and you will only be allowed to use the Scan to Folder function.

	Message		Cause			Remedy
	Your E-mail was not		An LDAP server limit set by an		Check your LDAP
	found, admin limit		admin authority has been		Check your LDAP
	found, admin limit		admin authority has been		configuration.
	exceeded.		exceeded.		configuration.
	exceeded.		exceeded.

	Your E-mail was not		An ambiguous response from		Check your LDAP
	found, ambiguous		the server was received by the		Check your LDAP
	found, ambiguous		the server was received by the		configuration.
	response.		client.		configuration.
	response.		client.

	Your E-mail was not		The client authentication		•	Check your LDAP
	Your E-mail was not		The client authentication			configuration.
	found, authentication not		method is not supported by the			configuration.
	found, authentication not		method is not supported by the	• Use a different authentication
	supported.		server.	• Use a different authentication
	supported.		server.			method.
						method.

					•	Check your LDAP
			There are too many connections			configuration.
	Your E-mail was not		There are too many connections	• Increase the amount of
	Your E-mail was not		to the server, and the client must	• Increase the amount of
	found, server busy.		to the server, and the client must			connections allowed by the
	found, server busy.		wait.			connections allowed by the
			wait.			server.
						server.
				•		Try authenticating later.

	Your E-mail was not				•	Check your LDAP
	Your E-mail was not		The session is not protected by a			configuration.
	found, confidentiality		The session is not protected by a			configuration.
	found, confidentiality		protocol, such as TLS.		•	Configure Authorized Send
	required.		protocol, such as TLS.		•	Configure Authorized Send
	required.					with SSL.
						with SSL.

	Your E-mail was not	During a bind operation, the
	Your E-mail was not	client is attempting to use an			Check your LDAP
	found, inappropriate	client is attempting to use an			Check your LDAP
	found, inappropriate	authentication method that the			configuration.
	authentication.	authentication method that the			configuration.
	authentication.	client cannot use correctly.
		client cannot use correctly.

	Your E-mail was not		The client does not have		Check your LDAP
	found, insufficient access		sufficient rights to perform the		Check your LDAP
	found, insufficient access		sufficient rights to perform the		configuration.
	rights.		requested operation.		configuration.
	rights.		requested operation.

	Your E-mail was not	A bad LDAP object has been		Check your LDAP
	found, bad attribute.	specified.		configuration.


168	Authorized Send Installation and Configuration Guide for imageRUNNER Machines