4. Select the [Enable Syslog] check box.

If you select the [Enable Syslog] check box, at least one syslog server must be configured.

Authorized Send supports only the user-level messages (Numeric Code = 1) and security/authorization messages (Numeric Code = 4) Facilities of the Syslog RFC3164 Protocol.

User-level messages are logged locally within the Authorized Send application. Security/authorization messages are also logged locally, as well as sent to all configured remote syslog servers.

Messages are logged in the following format: <PRI#> HEADER MSG

PRI = Priority number depending on the Facility and Severity.

HEADER = Mmm dd hh:mm:ss HostName/IP

MSG = Tag (the application) followed by the message.

For example: <34>Feb 23 22:14:15 iR-HostName AS sign-in failed.

NOTE

The messages sent to a remote syslog server cannot exceed 1,024 bytes. Any messages that exceed 1,024 bytes are split and sent as multiple messages.

Authorized Send Installation and Configuration Guide for imageRUNNER Machines

119