Canon 08011-41-UD2-003 6.1.11Logs Screen Error Messages

Message	Cause	Remedy
Application Display Name	The [Application Display	Make sure the application display
Application Display Name	Name (up to 20 characters)]	Make sure the application display
cannot contain the	Name (up to 20 characters)]	name is using valid characters.
cannot contain the	text box contains ‘x’, ‘y’, and	name is using valid characters.
following characters: ‘x’,	text box contains ‘x’, ‘y’, and	See step 2 in “Configuring
following characters: ‘x’,	‘z’, which represent invalid	See step 2 in “Configuring
‘y’, ‘z’	‘z’, which represent invalid	Optional Settings,” on p. 113.
‘y’, ‘z’	characters.	Optional Settings,” on p. 113.
	characters.

*Warning!: Due to the size	The application display name
of the Application Display	entered in the [Application	If this result is not desirable,
name entered, Application	Display Name (up to 20	If this result is not desirable,
name entered, Application	Display Name (up to 20	reduce the size of the application
Display Name may cover	characters)] text box may be	reduce the size of the application
Display Name may cover	characters)] text box may be	display name entered.
the Authorized Send tab	covering up the icon on the	display name entered.
the Authorized Send tab	covering up the icon on the
icon.	display tab.

*Warning!: Due to the size	The application display name
of the Application Display	entered in the [Application	If this result is not desirable,
name entered, Application	Display Name (up to 20	reduce the size of the application
Display Name may be cut	characters)] text box may get	display name entered.
off.	cut off on the display tab.

*This denotes a warning message. A warning message will not stop the saving of the configuration data.

6.1.11Logs Screen Error Messages

This section explains the Logs screen error messages, along with possible causes and remedies. For more information on the remedies, see “Configuring Log Settings,” on p. 117.

Message	Cause	Remedy
Port for Syslog Server x	The syslog server x, where x is	Enter a numeric value for the
Port for Syslog Server x	1, 2, or 3, has a UDP port whose	Enter a numeric value for the
must be a number.	1, 2, or 3, has a UDP port whose	UDP port.
must be a number.	value is not a numeric value.	UDP port.
	value is not a numeric value.

Port for Syslog Server x	The syslog server x, where x is	Enter a numeric value greater
Port for Syslog Server x	1, 2, or 3, has a UDP port whose	Enter a numeric value greater
cannot be zero.	1, 2, or 3, has a UDP port whose	than zero for the UDP port.
cannot be zero.	value is zero.	than zero for the UDP port.
	value is zero.

Port for Syslog Server x	The syslog server x, where x is	Enter a numeric value greater
Port for Syslog Server x	1, 2, or 3, has a UDP port whose	Enter a numeric value greater
must be a positive number.	1, 2, or 3, has a UDP port whose	than zero for the UDP port.
must be a positive number.	value is a negative number.	than zero for the UDP port.
	value is a negative number.

Unknown host: server	An unknown host, represented
Unknown host: server	by server, is entered in the	Check the host and try again.
	[Syslog Server] text box.

At least one Syslog Server	The [Enable Syslog] check box	Either configure at least one
	The [Enable Syslog] check box	syslog server or clear the check
	is selected, but no syslog servers	syslog server or clear the check
must be configured.	is selected, but no syslog servers	mark from the [Enable Syslog]
must be configured.	are configured.	mark from the [Enable Syslog]
	are configured.	check box.
		check box.

Authorized Send Installation and Configuration Guide for imageRUNNER Machines

161