Scan to Home Directory Settings
Retrieve Home | Select this check box to obtain the currently logged on |
Directory | user’s home directory information from the address |
(Active | book server with the LDAP attribute of “Home |
Directory only): Directory.” This will create a Home Directory element in the Preselected Share
IMPORTANT
If this check box is selected, and the [Retrieve Home Directory (Active Directory only] check box on the Create Authentication Server screen is also selected, the authentication server is checked first for the Home Directory. If no Home Directory is found on the authentication server, then the address book server is searched.
IMPORTANT
•If you select the Kerberos protocol for the authentication method, make sure that the device clock setting is properly synchronized with the configured authentication server and address book server. For more information on synchronizing the device clock with the server clock, see “Synchronizing the Device and Server Time,” on p. 142.
•Click the [Test] check box if you want to test the validity of the IP addresses you entered before saving.
•If validation fails, an error message will be displayed. Enter the correct information ➞ click [Save].
NOTE
The [Test] check box is selected by default. If you do not want to test the validity of the addresses you entered, click the check box to clear the check mark.
Authorized Send Installation and Configuration Guide for imageRUNNER Machines | 79 |