Only Use Cherry G84 | Select this check box if you want to only use the |
Keyboard: | Cherry G84 keyboard. By default, this check box is |
| selected. |
| NOTE |
| • The [Only Use Cherry G84 Keyboard] check box is |
| displayed only if the [Enable USB Keyboard input] |
| check box is selected. |
| • If a Cherry G84 keyboard and another HID are |
| connected to your machine at the same time, only |
| the Cherry G84 keyboard is functional for |
| Authorized Send. |
| • If the [Only Use Cherry G84 Keyboard] check box |
| is not selected and a |
| device connected to your machine, you have no way |
| to input text into Authorized Send since the MEAP |
| virtual keyboard is not displayed. |
| • If the [Only Use Cherry G84 Keyboard] check box |
| is not selected and the [Enable USB Keyboard |
| input] check box is selected, any USB keyboard can |
| be used to input text, but only the Cherry G84 |
| keyboard is supported. In this case, to avoid any |
| incompatibility issues between MEAP installed |
| applications and HID card readers, or other HIDs, it |
| is recommended that you select the [Only Use |
| Cherry G84 Keyboard] check box. |
| • The machine must be restarted each time you select |
| or clear the [Only Use Cherry G84 Keyboard] check |
| box for the change to take effect. |
Configuration Session | Enter the time in minutes until the Authorized Send |
Timeout (min): | Configuration servlet session times out. You can set |
| the timeout period between ‘1’ and ‘60’ minutes. The |
| default setting is ‘5’ minutes. |
Network Socket | Enter the time in seconds until the connection to the |
Timeout (seconds): | authentication server and address book server times |
| out. You can set the timeout period between ‘1’ and |
| ‘30’ seconds. The default setting is ‘5’ minutes. |
Authorized Send Installation and Configuration Guide for imageRUNNER Machines | 115 |