Use Public

Select [Yes] to configure the SMTP public credentials

Credentials:

(Public User Name, Public Password). If [Yes] is selected, enter

 

the user’s SMTP public name and password for SMTP

 

authentication. If [No] is selected, the user’s normal login

 

credentials are used.

SMTP Public

If [Yes] is selected for Use Public Credentials, you must enter

Username:

the user name for SMTP authentication.

SMTP Public

If [Yes] is selected for Use Public Credentials, you must enter

Password:

the password for SMTP authentication.

3.Click [Save].

If you make a mistake while configuring the settings, click [Reset] to return the settings to their original values.

A message is displayed informing you that the configuration has been saved.

IMPORTANT

•Click the [Test] check box if you want to test the validity of the IP address you entered before saving.

•If validation fails, an error message will be displayed. Enter the correct information ➞ click [Save].

NOTE

The [Test] check box is selected by default. If you do not want to test the validity of the address you entered, click the check box to clear the check mark.

66

Authorized Send Installation and Configuration Guide for imageRUNNER Machines