5.Enter a syslog server’s IP address under <Syslog Server> in the table ➞ enter the corresponding UDP port number for the syslog server under <UDP Port> in the table.

You can configure up to three syslog servers. You can enter a maximum of five numbers for the UDP port.

6.Click [Save].

7.To view the log file, click [Current Log] or [History Log] (if available).

A browser window opens to display a snapshot of the contents of the log file.

NOTE

•The log file contents displayed are not live. To view the latest contents of the log file, you must close the log window ➞ refresh the Authorized Send Configuration servlet ➞ click [Current Log] to open a new browser window.

•[History Log] only appears after the current log reaches a maximum size of

512 KB. Once the current log reaches the maximum size, it replaces the history log (if it exists), or creates a new history log.

8.To download the log file, right-click [Current Log] or [History Log] ➞ select [Save Target As] ➞ select a location to save the file.

NOTE

If HTTPS is being used for the Configuration servlet, you must first open the log file (by clicking [Current Log] or [History Log]), and then save the log file (by clicking [File] ➞ [Save As]). Right-clicking [Current Log] or [History Log] does not work with HTTPS enabled.

120

Authorized Send Installation and Configuration Guide for imageRUNNER Machines