3.11 Configuring Scan to Folder Settings
You can enable the Scan to Folder function and configure the Access Controls and General Settings.
1.Click [Scan to Folder] ➞ [General].
If necessary, see the screen shot in step 14 of “Flow of Configuration Operations,” on p. 35.
2.Select the [Enable Scan to Folder] check box.
If you want to disable the Scan to Folder function, click the [Enable Scan to Folder] check box to clear the check mark.
You can only disable the Scan to Folder function if there is at least one other Authorized Send function enabled.
100 | Authorized Send Installation and Configuration Guide for imageRUNNER Machines |