Cisco Systems Network Switch Cabling manuals

Computer Equipment > Switch

When we buy new device such as Cisco Systems Network Switch Cabling we often through away most of the documentation but the warranty. Very often issues with Cisco Systems Network Switch Cabling begin only after the warranty period ends and you may want to find how to repair it or just do some service work. Even oftener it is hard to remember what does each function in Switch Cisco Systems Network Switch Cabling is responsible for and what options to choose for expected result. Fortunately you can find all manuals for Switch on our side using links below.

Cisco Systems Network Switch Cabling Manual

18 pages305.78 Kb

Control Node and Network Switch Cabling Example
- Cabling control node and switch hardware
  - Prerequisites
  - Port numbering
    - 2CASSATT ACTIVE RESPONSE CONTROL NODE AND NETWORK SWITCH CABLING EXAMPLE 17
    - Figure 1 Switch Panel and Control Node Cabling
    - 3Table 1 shows how each port is used on the switch and control node.
  - 4Racking and cabling guidelines
    - What about connecting application nodes?
- 6Configuring the switches
  - Connecting the switch to a terminal server
  - 7Restoring the factory default settings
    - 84. Enter the configuration mode, as follows:
    - 5. Renumber the switch, as follows:
    - 6. Exit the configuration mode, as follows: 7. Halt and perform a cold restart, as follows:
    - key to get started. Skip the initial configuration, as follows:
  - 9Setting switch options
    - 102. Enter the privileged mode, as follows: 3. Enter the configuration mode, as follows:
    - 4. Turn the messages off, as follows:
    - 6. Turn off all the interfaces on the second switch, as follows:
    - 5. Turn off all interfaces on the first switch, as follows:
    - 11 feature, as follows:
    - 10. Enable the
    - 1212. Set the interface connection to the router, as follows:
    - 1313. Set the remaining interfaces, which are identical, as follows.
    - for the link to that device.
    - 1414. Disable IGMP snooping, as follows:
    - 15. Turn off the HTTP server, as follows: 16. Set the message of the day, as follows:
    - Configuration Guide
    - the message as required by your site policy:
    - 1517. Turn all the interfaces back on, as follows: